sure
first step
ESP8266_BOARD=1 FLASH_4MB_C1=1 make
second step - manual way
cd to_your_firmware_dir
esptool.py --port "your_com_port" --baud 460800 erase_flash
esptool.py --port "your_com_port" --baud 460800 write_flash \ --flash_freq 80m --flash_mode qio --flash_size 4MB-c1 \ 0x0000 boot_v1.6.bin 0x1000 espruino_esp8266_user1.bin \ 0x3FC000 esp_init_data_default.bin 0x3FE000 blank.bin
4MB-c1
third step - send updates with wiflash.sh
sh wiflash.sh "ip_of_esp":88 espruino_esp8266_user1.bin espruino_esp8266_user2.bin
@MaBe started
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
sure
first step
ESP8266_BOARD=1 FLASH_4MB_C1=1 make
second step - manual way
cd to_your_firmware_dir
esptool.py --port "your_com_port" --baud 460800 erase_flash
esptool.py --port "your_com_port" --baud 460800 write_flash \
--flash_freq 80m --flash_mode qio --flash_size
4MB-c1
\0x0000 boot_v1.6.bin 0x1000 espruino_esp8266_user1.bin \
0x3FC000 esp_init_data_default.bin 0x3FE000 blank.bin
third step - send updates with wiflash.sh
sh wiflash.sh "ip_of_esp":88 espruino_esp8266_user1.bin espruino_esp8266_user2.bin