Search results for:

If the screen isn't changing, the power consumption is basically null, as if it was off. You won't save battery by blanking it out.

So far I haven't had much luck finding an equivalent on Amazon Canada.

Is there documentation on the pinout order?

I cannot upgrade firmware through Gadgetbridge as the upload always stops at 5-10%

I have the same issue with Banglejs Gadgetbridge (v0.71.2a-banglejs, from Google Play Store), so I usually disconnects from GB and do the update through https://banglejs.com/apps using Chrome / Bromite.

Two days later, the difference is quite drastic, with the same set of apps.

I switched back to 2v16 and the battery draw is back to normal. I'll have to dig deeper to find the source of the drain.

Sadly I don't, I didn't get the chance to look at the logs before it happened. I've reconfigured my watch from scratch, keeping the apps and tweaks to a minimum. We'll see how it goes from there, and if the battery drain happens again I'll make sure to capture the logs often.

Hmm so I enabled logging, the watch got really sluggish, and at some point frozen. I had to force it to reboot and it said

Checking storage...
Storage is corrupt.
Erasing Storage Area...

😬

It would be really handy to troubleshoot battery life issues, right now I'm struggling to keep it to last two days on a single charge, and I ran a calibration after charging it for three hours, the flattened the battery, recharged it for thee hours and the issue persists, so I don't think it's a calibration issue.

I don't receive more notifications than usual either.

Device Type	BANGLEJS2
Firmware Version	2v16.183
Apps Installed	launch (0.20), boot (0.56), widlock (0.08), widalarm (0.01), widmessages (0.04), messages (0.58), agenda (0.13), files (0.08), widbt_notify (0.17), calclock (0.06), widclk (0.07), mylocation (0.09), owmweather (0.02), widslimbat (0.01), weather (0.24), wid_edit (0.02), sched (0.21), qmsched (0.09), alarm (0.38), authentiwatch (0.07), android (0.23), astrocalc (0.04), quicklaunch (0.10), messageicons (0.05), messagegui (0.65), setting (0.58)

Yep, that did it, forgot about that settings 😳

I had to reset my BangleJS2 and I'm currently unable to set any new alarms or set the time for the auto-quiet mode app. As soon as I press New to create an alarm schedule, the alarm app seems to freeze and I cannot do anything but press-hold the button to get back to the clock. Same issue with trying to set the time for the auto-quiet mode (qmsched). I did manage to set up an alarm through the BangleJS Gadgetbridge app.

I tried reinstalling those apps as well as the scheduler, without any success. Not sure what else to look for.

Device Type	BANGLEJS2
Firmware Version	2v16.93
Apps Installed	launch (0.20), boot (0.56), widlock (0.08), setting (0.57), widalarm (0.01), alarm (0.38), messageicons (0.04), messagegui (0.64), widmessages (0.04), messages (0.58), android (0.23), authentiwatch (0.07), agenda (0.13), files (0.08), widbt_notify (0.17), calclock (0.06), widclk (0.07), mylocation (0.09), owmweather (0.02), quicklaunch (0.09), widslimbat (0.01), weather (0.24), wid_edit (0.02), sched (0.21), qmsched (0.09)

Thanks!

I updated messagegui to v.0.63 and notifications are now opening the app and the watch vibrates once loaded.

I updated my BangleJS2 to Message v0.58 and Message Widget v0.03. When I send a test using BangleJS Gadgetbridge 0.71.2a I only have the message widget showing up, no vibration and it doesn't auto-open to show the notification's content.

My current clock is CalClock, if that makes any difference.

Vibrate: ::
Vibrate for calls: ===
Repeat: 4s
Vibrate timer: 60s
Unread timer: 30s
Min Font: Small
Auto-Open Music: [_]
Unlock Watch: [x]
Flash Icon: [_]
Quiet mode disables auto-open: [x]
Disable auto-open: [_]
Widget messages: 1
Icon color mode: color

Thanks, all fixed on my end :)

Ok, so I selected my current location, pressed "Save", which seems to update
mylocation.json, but then it says Customize failed, window closed. I don't see anything else to do or press after that step.

Hi, I use the development version of BangleApps and right now the My Location app is unable to be updated from 0.07 to 0.08, as the button is grayed out.

I tried uninstalling it and reinstall from dev but it doesn't let me, only showing ≡ to pop up the web UI to select a location.

Not sure if that is normal, just wanted to flag it.

Definitely faster, thanks!

See http://forum.espruino.com/conversations/­379050/

Thanks @Gordon!

If you backed up the APK you could technically uninstall the current version and sideload the previous one.

Would you mind sharing a link to an online listing?

I get the same error when using A-GPS Data and OpenWeatherMap weather provider since I updated to 0.68.0b. Looks like something broke in that version.

https://forum.espruino.com/conversations­/377591/

Thanks for that, it's been rock-solid ever since :)

Personally I'm a big fan of milanese loops as they require no adjustment, and any 20mm watchband with pins should fit.

https://i.imgur.com/lERePSE.jpg

I see there that Bangle.js Gadgetbridge is also able to acquire a location, would it be possible to make the latitude and longitude available for watchapps like MyLocation, so that it could keep the location updated from the phone periodically?