Search results for:

Hi Gordon, I've replied to your message.

Thanks Gordon.

Unfortunately I think attempting disassembly/re-assemble is definitely not something I'd be capable of doing 😔

Hi Gordon, thanks again for the support.
The watch ran flat and I charged overnight but it's still the same.
Connected via bluetooth and reset all settings and uploaded default apps just in case but screen touchscreen still not responding.

Thanks again Gordon, I've ran Web IDE and attached is the response
">Bangle.setLCDTimeout(0);
=undefined

Bangle.setLCDPower(1);
=undefined
Bangle.setLCDBrightness(1);
=undefined
if (Bangle.setGPSPower) Bangle.setGPSPower(1,"flat");
=true
if (Bangle.setHRMPower) Bangle.setHRMPower(1,"flat");
=true
if (Bangle.setCompassPower) Bangle.setCompassPower(1,"flat");
=true
if (Bangle.setBarometerPower) Bangle.setBarometerPower(1,"flat");
=true
setInterval(function() {
:var i=1000;while (i--);
:}, 1);
=18
Uncaught Error: I2C Error: Arbitration (start)
at line 1 col 12
var i=1000;while(i--);

               ^

in function called from system
Uncaught Error: I2C Error: Arbitration (start)
at line 1 col 12
var i=1000;while(i--);

               ^

in function called from system
at line 1 col 12
var i=1000;while(i--);

               ^

in function called from system
Uncaught Error: I2C Error: Arbitration (start)
at line 1 col 12
var i=1000;while(i--);"

Hello Gordon, thank you for your reply.
No, didn't do anything except wore it all week and it was working perfectly, notifications coming through, alarm working etc.
BTW sorry if I wasn't clear on the previous post, but although I didn't really use it, it was charged intermittently.
Rebooting through bootloader, it shows the start screen (the one with "Bangle" and a picture of a watch) and then "uncaught error I2C", which fills the screen.
Pressing the button again takes it back to the clock.
I can press the button again to get the apps menu but can't scroll or touch anything so can'r access the flatten battery option.

Following my previous issues with battery life, I now have an issue that the screen is totally unresponsive.

Pushing the button will toggle between the clock and settings but I cannot select any setting or scroll up/down.

I've re-installed the default apps but still no joy.

Does anyone have any suggestions please?

Update! That seems to have worked.
Left on charge for 4 days (2 days turned off,then 2 turned on).
Took off charge Saturday morning and set up and been using since….60 hours in and battery still at 85%.

Update - factory reset watch and fully charged. Not connected to anything, just turned on and left it… lasted approximately 26 hours before powering off so seems I’ve definitely got an issue with the battery. @Gordon

Not quite, as I did connect it to my phone.
I'll try again without connecting to anything and see if it's any different and report back.

Update - left on charge for 12+ hours so fully charged
Was already on latest firmware as suggested by @fanoush
Also disabled flash and removed messages widget as suggested by @WizardStan in other post.
Still only getting 24 hours battery life.

Thanks for the reply Gordon.
I did charge overnight, although I'm not sure if I have done that again since i factory reset so I'll give that a go.
I am in the UK BTW.

I have a kickstarter JS2 which hasn’t had much use. I bought it as a possible replacement for my pebbles but as the app wasn’t ready day 1, I kinda parked it. I’ve pulled it out a few times since but never really got to grips with it.
Anyway, I thought I’d try again but the battery life is really poor…it just about manages a day.
I’ve fully charged it a few times, factory reset and tried running with default apps only but no luck so I’m guessing the battery is knackered.
I wouldn’t be keen to try myself, but is there any replacement service?