Search results for:

Absolutely lovely clock!

On the actual device I'm not seeing any issues with the 8 being too dark on the dark theme...

The bottom 3 dots are cut off at the bottom though, so the watch face is slightly too big for the screen. And, it would be lovely for the battery to not have the seconds running when the screen is locked and the back light is off.

And since I see some other wishes for clock faces/numerals, a square face like the Analog Dark clock would look beautiful.

I had a brief period a fewweeks ago when I'd seeMEMORY_BUSY a few times a week, but have not seen it at all since my last message in this thread (14 days ago).

Works like a treat! Great work @Gordon.

Great! I was actually typing out the same advice as I received a notification that you'd replied again... :)

Have you tried any of the ways to reset and deleting the code on the watch, described in the docs?
https://www.espruino.com/Bangle.js#reset­ting-without-loading-any-code

Did you try removing the watch from the Gadgetbridge app on your phone, and pairing it again with the Android integration app installed on the watch (and Gadgetbridge removed)?

@user138784 Did you try a different browser or possibly doing a full refresh (ctrl + F5) of the App loader and/or deleting it's cookies?

Edit: I might add that I have no issues removing Custom QR through the App loader... So a cache cleaning sounds pretty plausible as a solution to your issue.

I've pulled down my LCD brightness to .5 (I find that more than enough with the reflective display), changed Twist threshold to .2 and Twist timeout to 500. Using the Anton clock and always connected to Bluetooth. I don't use any pedometer or heart rate monitor stuff. Easily lasts 7-10 days wearing it from getting out of bed until going back to sleep.

Edit: maybe the wake on touch turns on the display a lot, unintentionally. That could really impact battery life.

But before anything else, update the firmware. There's been many fixes and improvements since 2v10.219...

https://www.espruino.com/Bangle.js2#firm­ware-updates

I'm running the Anton clock with battery, Bluetooth and weather widgets. Android integration and Messages are also frequently used, of course...

I've seen that randomly (just everyday use) on the watch since updating to 2v11.251. Haven't had time to troubleshoot yet...

Will turn on debug messages and see if anything pops up.

Gordon's on a much deserved vacation for a couple of weeks, but I'm pretty sure the B2 chargers will turn up in the store eventually (once the Bangle.js 2 officially becomes available for sale).

I'm pretty sure you should be able to find compatible cables online (and I know I've seen someone post a link to such cables, so you could probably find that if you search the forum).

Edit: found it - http://forum.espruino.com/conversations/­370511

It's under the "LCD" menu, which in settings app 0.38 is found under the "System" menu in. If you're on a previous settings version"LCD" is in the main settings menu.

Yes, Oxygen OS is very aggressive when it comes to killing background processes. If you haven't already, make sure that Gadgetbridge is allowed to autostart and that it's removed from battery optimisation. And that all permissions are given to the app.

It seems unlikely that both watches would have some kind of fault that would cause those issues...

My gut reaction is that there's something about your setup that's the culprit (but of course, human intestines are notoriously bad at troubleshooting tech so I might be completely wrong)...

What is your setup? Firmware version (if you're not on the latest it might be a good idea to update), installed apps, phone, etc...

I've seen that when forgetting to close a row with a semicolon somewhere. Check if there are any warnings when you paste the code in the right side of the Web IDE.

I'm a little confused... Those are the exact steps described in the video you linked. And also what is described in the docs:
https://www.espruino.com/Bangle.js2#firm­ware-updates

Was something unclear about the instructions in the video (or in the docs, if you've seen those)?

You mean something like what's talked about here ?

Switch 9 and 10. First go into DFU mode on the watch and then pick the DFU device in the list of Bluetooth devices.

I took a shower with the watch attached to my wrist yesterday. Maybe this caused the button to have a malfunction?

It's been covered before, but worth repeating. IP67 is not "waterproof". Splash-proof/"accidentally and temporarily submerged in shallow water"-proof would be a better description...

A shower head can spray the watch with way higher pressure than what the watch is rated for, so I would not risk taking it into the shower.

Confirmed fixed in Gadgetbridge 0.63.1.

I've got the exact opposite experience. My Bangle.js 1 won't stay connected unless I keep my phone on me, while the Bangle.js 2 will stay connected two rooms away (AAC walls). The Bangle.js 2 should definitely have better range than what you're seeing...

Are you on the latest firmware?

I can confirm this behaviour. I've also added this info to your Github issue.

@ajkm That's taken care of on the phone side, and is already implemented in Gadgetbridge (the Android app). But, IIRC, you use an Iphone so maybe that option isn't available there...

@WizardStan If you install the GB debug app on your watch and have that open when a notification is received on the phone, what does it say (when the issue is active)?