-
-
-
-
ooh, i was about to ask if this app (and i find the idea great and brilliant, it s really something i expect from the watch) was actually working.
I always wear my watch on left wrist so i did not even notice it could work.
@storm64 -
-
Hello @Gordon
No worries about the delay, I'm naturally patient and I know you're very busy.
And being patient is worth it because you found a solution to this little problem :)
I installed the latest CuttingEdgeFirmware
And copied/pasted the code provided in the CustomBootCode app.
Unfortunately, the "upload" button seems to have no effect (on my iPad with WebBle). as if the code had a typo (I tested with another code)
Maybe I can go through the IDE? -
I tested a few in silicone. They did take a while to arrive, but that's what happens when you order from China.
The main advantage of these covers is that they protect the skin from contact with the charging pins, and protect the sides of the watch case, as well as the button.
In the models in the picture, the ones with the circular hole are more fitted and fit perfectly to the Bangle2. Those with the square hole are a bit small. -
If HughB agrees, I will quote his answer in another Thread
HughB
There's a whole thread on this a while back, I'd have to look back to find it. About a month ago.
The battery usage as shown by % is not linear. The last 40% will shoot down in 1 day. The first 60% may take 3-20 days depending on what things you have configured.The best is to think about charging your Bangle when you approach the 35/40%
-
-
-
-
-
-
-
Thank you @Gordon
I guess the only solution really is to look at a replacement
Ok, sorry about that, I wish it was something that could be solved more simply, maybe with code, but anyway, if you think the watch needs to be replaced...
is it more likely to drop out if you move it quickly or tap the watch body?
The disconnection just happens with the gradual removal, even slowly
-
Hello @Gordon
I come back again on the problem I have of limited distance of bluetooth connection from my Bangle2 (yes, again, sorry)
First of all, after several tests I realized that my first analysis a few months ago was wrong, because I did not wait long enough.
I did some more tests, with several different devices (a GSM galaxy S9 under /e/os, an iPadpro 10.5 under iOs13, a MacPro under OsX.13) and different applications (nrfToolBox, WebIDE, Chromium, LightBlue and obviously GadgetBridge)
With all these different configurations, beyond one meter (on average) after about ten seconds, with or without movement, the Bluetooth connection is lost.There is no such problem with any of the other bluetooth devices tested in the same configuration, including the Bangle1.
Until now, this was not a major concern, my phone being always in my pocket, my wrist never really very far. But when I want to be able to use the Bangle2, and the CSC application with my bike for example, it can't work, the distance being a little more than a meter.
Is there any other test you would advise me to do, or a magic code maybe that would make this range more important?
In any case, thank you again for this little marvel that I cherish every day, and for the implication you invest in it, it's really a very nice project !
-
-
-
-
-
hi,
compaction failure happened again to me this morning.
After half an hour, compaction was still saying it would take approx. 1 min.
I pushed the button once and it took me back to the menu and then to the clock. I noticed it wasn’t the one that i set. Clicking again got me a message that ´´launcher’´ wasn’t found.
checking the storage in IDE, most of files/apps are missing…latest firmware 2v12.40 and bootloader
kickstarter bangle2 -
-
I had to do a complete reinstallation three times already, and even if it allowed me to sort out and reinstall only the apps I really needed, I would have liked to find more easily the few code modifications and the created data.
Since then, I've got into the habit of bookmarking in the app store the applications I want to find each time I re-install, and not only the indispensable ones (which unfortunately doesn't include those with the "three bars" sub-menu) and to take a screenshot of the list of apps from the "more..." tab.
I also sometimes try to save the json of the alarms, the pattern launcher and some others.
So, I am for the possibility of making a general Backup :)