user6376

Most recent activity

• Flashing Espruino fails, bootoader LED not pulsating

  in General • 10 years, 11 months

  

  Another update

  Firmware update works on Ubuntu 12.04 Chrome v32. The emphasis is on using Chrome version >31.

• Flashing Espruino fails, bootoader LED not pulsating

  in General • 10 years, 11 months

  

  Thanks. That worked. Switched to a Win7 laptop. Firmware updated. Running blinking-led. Was earlier running on Ubuntu 10.04 with Chrome v27

  Learning:

  1. The IDE works fine on Ununtu 10.04 with Chrome v27 except for firmware updates.
     
  2. For firmware updates switch to a Windows7 machine.
     
     

  One request regarding the latest firmware - would help if it shows the red led 'on' when connected properly as was the case with the earlier firmware. Confirms that the USB connector is plugged in properly.

  Thanks once again.

• Flashing Espruino fails, bootoader LED not pulsating

  in General • 10 years, 11 months

  

  Yes. Exactly

• Flashing Espruino fails, bootoader LED not pulsating

  in General • 10 years, 11 months

  

  The error notification is almost instantaneous. checked again as instructed but still get the same error... changed the USB port and used the link that points to http://microcosm.app/out/Rev

• Flashing Espruino fails, bootoader LED not pulsating

  in General • 10 years, 11 months

  

  Hi,

  Just received my 2 Espruinos today. Tried flashing as per procedure outlined on Linux using the Chrome app. Everything goes fine like 'Erasing' -> 'Writing Flash and then I get an 'Error flashing' error.

  Kindly advise.