user157385

Most recent activity

• Pebble Clock With Distance App

  in Bangle.js • 11 months, 2 weeks

  

  Thanks for the Don't Kill My App tip. My dreaded Huawei is top of their list! You must be psychic. I followed through changing as many settings available to me on the EMUI version, and all is connected. For the moment, I am keeping the phone and Bangle close to ensure short range bluetooth distance.
  Pity I didn't wait for your reply. In my frustration I wiped the custom rom which was installed initially, to stop Huawei constant reporting and intrusions, reluctantly reverting back to stock Huawei Emui. All is not lost though, with the DKMApp checklist, comms between watch to phone working again. Will revert to a custom rom again asap.

  PS: Yes a tips type section on here would be useful to me (cant find the original post).

• Pebble Clock With Distance App

  in Bangle.js • 11 months, 2 weeks

  

  Yes, Health Tracker is on. I can see graphs of steps etc on the Bangle, and timer is set to 10 minutes. Bluetooth is at Connectable and I have tapped Make Connection Stay On, to Yes. I have swapped Bluetooth on my phone to show Visible to all devices, then back to Only visible to paired devices. Back to Gadgetbridge again and still waiting to reconnect, hanging for a very long time. Then press three dropdown buttons to disconnect or reconnect whatever. Back to Waiting to Reconnect. This morning I tried away from the house and interference,but got the same result, phone was close and fully charged. Today there are steps showing on both the Bangle and Gadgetbridge, but the connection is predominantly unconnected or waiting to reconnect. We had an ancient Mi Band working on my phone which worked ok, now back on another phone and working within the same conditions. No other devices connected. Incidentally earphones pair and work straightaway on my phone (not sure if thats relevant). Sometimes I have forced a connect using 'Full Sync' in activity section, on Gadgetbrige but usually it disconnects. Running out of ideas.....

• Pebble Clock With Distance App

  in Bangle.js • 11 months, 2 weeks

  

  Step count today is currently 7146 (and rising). At least 7000 steps were recorded two/three hours ago. Gadgetbridge is slowly recording the additional steps with each *Full Synch on the phone, but NOT from the earlier walk. Bangle still showing the earlier 7000+ steps on display of Pebble Clock WD (and more recent additional steps),**but they are not being transferred? I checked activity today on the phone and its showing only steps from a couple of hours ago. The earlier walk is not currently shown anywhere on the phone.
  I'm guessing a Bluetooth disconnection. Does Bangle 2 transfer these steps on reconnection to the phone if there's been a break in Bluetooth earlier today? Or maybe if Gadgetbridge had the break? I checked yesterday's step count and it shows the total, as far as I recall. I'm on V20 version.

  *Is this the best way to update?
  **should have said that only the newer steps are being transferred over.

• Pebble Clock With Distance App

  in Bangle.js • 11 months, 2 weeks

  

  Thanks for pointing me to the right direction. I have made the upload and will check it out tomorrow, thanks again.

• Pebble Clock With Distance App

  in Bangle.js • 11 months, 3 weeks

  

  Can you give a rough estimate when Pebble Clock With Distance v0.06 will be available for download?

• Pebble Clock With Distance App

  in Bangle.js • 11 months, 3 weeks

  

  Thanks for your speedy reply and fix. I am struggling to pair and connect at the moment with the App Loader. Tried W10 Edge and Chrome on my phone and laptop. Must be settings somewhere. Bangle shows able to connect, Gadgetbridge connected, but nothing pairing.................