Hello, i Flashed the bootloader, partitions and bin from here: http://www.espruino.com/binaries/travis/master/
The flash goes well but I got this error when I connect my esp with espruino ide web:
| |_ ___ ___ _ ||___ ___ | |_ -| . | _| | | | | . | ||_| || |_|||_|_|
|_| espruino.com
2v17.55 (c) 2021 G.Williams Espruino is Open Source. Our work is supported only by sales of official boards and donations: http://espruino.com/Donate
WARNING: Scan stop failed WARNING: set rssi scan not implemeted yet Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled. Core 0 register dump: PC : 0x40112b04 PS : 0x00060030 A0 : 0x801137db A1 : 0x3ffea370 A2 : 0x00000001 A3 : 0x00003fff A4 : 0x00000001 A5 : 0x00000000 A6 : 0x00000000 A7 : 0x0000000a A8 : 0x00003fff A9 : 0x3ffea350 A10 : 0x00000000 A11 : 0x00037ff2 A12 : 0x3ffea364 A13 : 0x00000000 A14 : 0x00000001 A15 : 0x3ffb9701 SAR : 0x00000002 EXCCAUSE: 0x0000001c EXCVADDR: 0x0000000c LBEG : 0x400924d8 LEND : 0x400924f4 LCOUNT : 0xffffffff ELF file SHA256: 0000000000000000 Backtrace: 0x40112b01:0x3ffea370 0x401137d8:0x3ffea390 0x40128b96:0x3ffea3b0 0x40128cf5:0x3ffea460 0x40136e84:0x3ffea480 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:2984 load:0x40078000,len:10700 load:0x40080400,len:5236 entry 0x40080658 E (29) boot: ota data partition invalid, falling back to factory E (567) psram: PSRAM ID read error: 0xffffffff E (567) spiram: SPI RAM enabled but initialization failed. Bailing out. E (567) spiram: SPI RAM not initialized
I don't know how to fix these errors. I can't upload any code on ram ( I understand that I have not the spi ram )
How can I fix these errors?
Thank you so much!
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
Hello, i Flashed the bootloader, partitions and bin from here: http://www.espruino.com/binaries/travis/master/
The flash goes well but I got this error when I connect my esp with espruino ide web:
| |_ ___ ___ _ ||___ ___
| |_ -| . | _| | | | | . |
||_| || |_|||_|_|
2v17.55 (c) 2021 G.Williams
Espruino is Open Source. Our work is supported
only by sales of official boards and donations:
http://espruino.com/Donate
I don't know how to fix these errors. I can't upload any code on ram ( I understand that I have not the spi ram )
How can I fix these errors?
Thank you so much!