user142745

Most recent activity

• Bangle.js App Loader returns "Upload failed, Unexpected response"

  in Bangle.js • 4 months

  

  @fanoush @Gordon sorry guys, I ordered nRF52DK and didn't have time to get to this since then.
  Had this tab open for this whole time and was just clearing my open tabs when I noticed your replies. Thanks for getting back to me.
  So, while I was waiting for the nRF52DK to arrive I managed to turn an ESP32 dev board into an SWD debugger and also managed to copy the firmware from my Puck 1, I tried to write the dump to Puck 2 but looks like that made everything even worse. No lights are comming up at all when I connect it to the battery.

  So, I have my nRF52DK on my desk now and would like to have some guide on how to recover the dead Puck 2.

  Thanks in advance!

• Bangle.js App Loader returns "Upload failed, Unexpected response"

  in Bangle.js • 9 months, 1 week

  

  @Gordon @fanoush I though I got that code from a wrong place but looks like it's the same thing in the docs https://github.com/espruino/EspruinoDocs/blob/master/boards/Puck.js.md#recovery-after-2v04-installation
  Is it wrong here? or something else happend to my puck?

• Bangle.js App Loader returns "Upload failed, Unexpected response"

  in Bangle.js • 9 months, 1 week

  

  @fanoush thanks for the info, I somehow overlooked that.
  Are there any tutorials on how to get started?

• Bangle.js App Loader returns "Upload failed, Unexpected response"

  in Bangle.js • 9 months, 1 week

  

  I ran this

  setTimeout(function() { NRF.restart(function(){
  poke32(0x4001e504,2);while(!peek32(0x4001e400)); // enable flash erase
  poke32(0x4001e514,1);while(!peek32(0x4001e400)); // erase whole uicr
  poke32(0x4001e504,1);while(!peek32(0x4001e400)); // enable flash writing
  poke32(0x10001014,0x7A000);while(!peek32(0x4001e400)); // set bootloader
  poke32(0x10001018,0x7E000);while(!peek32(0x4001e400)); // set mbr settings
  poke32(0x1000120c,0xfffffffe);while(!peek32(0x4001e400)); // NFC pins as GPIO
  poke32(0x4001e504, 0);while(!peek32(0x4001e400)); // disable flash writing
  });}, 2000);NRF.disconnect();
  
  

  on puckjs v2.0b and not nothing seems to be working :( How can I recover?
  I am not able to get into dfu mode