natman1970

Most recent activity

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 9 months

  

  @Gordon, apologies for not replying initially. It all worked before and tried the above code as well and it changes the registers as intended.
  This then means that the NFC pins that had stopped working as GPIO now work again which is what I was trying to prove all along.....

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  Will try it....

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  Many thanks for that. Will look at the app then. Its probably more the downloading firmware files from a remote location...

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  @Gordon, for clarity, why do we need to restart the "softdevice" to be able to use the poke32 functions?

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  You really did mean an app (not going down that route)... I've just sent someone instructions to use the URL approach but firmware zip file might change so it won't be right. the local file select function just doesn't work which is a shame. Tried it numerous times..

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  I'm struggling to find the link to the Nordic app to try..Must be missing the obvious

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  Thankyou @Gordon, that works... I've put in the extra semi-colons...

  NRF.disconnect();setTimeout(function() { NRF.restart(function(){ LED.set();
  poke32(0x4001e504,1);while(!peek32(0x4001e400)); // enable flash writing
  poke32(0x1000120c,0xfffffffe);while(!peek32(0x4001e400)); // NFC pins as GPIO
  poke32(0x4001e504, 0);while(!peek32(0x4001e400)); // disable flash writing
  });}, 1000);
  

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  Oh ok. I use TTL Serial devices all the time.. missed that. I'll try it but for the production pcbs this will be a pain to connect serial and override the register.

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  Thanks @fanoush, Am I missing something as my MDBT42Q has no USB connector?

• Using pins D9 & D10 on the MDBT42Q

  in Puck.js, Pixl.js and MDBT42 • 3 years, 10 months

  

  I got the latest FW in using the ULR link as I mentioned but the write register commands aren't working for me....