Most recent activity
-
Hey guys, thanks a lot for supporting Espruino on the ESP32, it works like a charm for me so far (I'm using it successfully with GPS and an OLED display).
But today I tried to turn off Wifi and Bluetooth via
ESP.enableBLE(false);
andESP.enableWifi(false);
. Unfortunately I always end up in a boot loop. It works when I disable either Wifi or BLE, but not both. When I try to disable both, this is logged every second:>ESP32.getState(); ={ sdkVersion: "v3.1.3-dirty", freeHeap: 41068, BLE: true, Wifi: false, minHeap: 35068 } >ESP32.enableBLE(false); Erasing saved code. Done! ets Jun 8 2016 00:22:57 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:2668 load:0x40078000,len:7304 load:0x40080000,len:5312 entry 0x40080274 E (540) spiram: SPI RAM enabled but initialization failed. Bailing out. WARNING: Bluetooth is disabled per ESP32.enableBLE(false) Guru Meditation Error: Core 0 panic'ed (StoreProhibited). Exception was unhandled. Core 0 register dump: PC : 0x400d8b1c PS : 0x00060430 A0 : 0x800d915f A1 : 0x3ffde6d0 A2 : 0x00000001 A3 : 0x00001e78 A4 : 0x00001000 A5 : 0x00000000 A6 : 0x3ffc40cc A7 : 0x3ffd6944 A8 : 0x00000000 A9 : 0x00000001 A10 : 0x00000000 A11 : 0x0001e780 A12 : 0x00000005 A13 : 0x00000012 A14 : 0xffffffff A15 : 0x0003ffff SAR : 0x00000019 EXCCAUSE: 0x0000001d EXCVADDR: 0x0000000e LBEG : 0x4009b418 LEND : 0x4009b423 LCOUNT : 0xffffffff Backtrace: 0x400d8b1c:0x3ffde6d0 0x400d915c:0x3ffde6f0 0x400f93a5:0x3ffde710 Rebooting...
I'm using the Adafruit Huzzah32 Board with Espruino 2v06.
I needed to reflash the board to get back access. Hope anyone has an idea why that happens.
Thanks,
Patrick
Damn, sorry. I saw too late, that there is a post already... http://forum.espruino.com/conversations/337530/