Most recent activity
-
Connect to the hardware seems OK... The console shows lines from previously loaded program, but after the command "Send to Espruino" it completely freezes, so I stopped further attempts with my netbook ...
-
I tried an old netbook with windows xp, intel atom and 1GB of RAM and the web IDE practically does not work and does not even see any one module ... Although my main PC is windows 10, intel core i3 and 4 gb RAM, but it seems to me, that it is the problem with the speed of the computer ... What are the basic PC requirements of the Web IDE?
-
No, I have this option turned off all the time... except that switched on for a short time to check that in this mode it does not work normally too ...
-
And still it does not find the module from time to time ...
-
I found a way to circumvent it. I cut the path to the sandbox projects folder. It was "D: \ MyDocum \ MyProjects \ STM32F4-Discovery \ javascript \ projects" and it is now "D: \ MyDocum \ Espruino \ projects". In principle, you need to pay attention to this problem as a bug ...
-
I work online all the time... By the way, I tried both modes with the same results ...
-
Maybe not quite a problem with the screen but strange behavior. I can not download three of my own modules. Two can, and the third one, it does not matter which one - does not load.
And a weird message in the console:.........
F3C66A9BC06A4E512CEFA4F652750:projects"}- my-gpio-expander requires []
[notify_info] No error. Minified 1109 bytes to 671 bytes. - my-at requires []
[notify_info] No error. Minified 5452 bytes to 1685 bytes.
loadModule(my-atsms)
Searching for modules/my-atsms.min.js
modules/my-atsms.min.js not found in offline archive
ERROR: Found module, but search took too long.
ERROR: getURL("https://www.espruino.com/modules/my-atsms.min.js") error : Not Found
Searching for modules/my-atsms.js
modules/my-atsms.js not found in offline archive
ERROR: getURL("https://www.espruino.com/modules/my-atsms.js") error : Not Found
WARNING: [notify_warn] Module my-atsms not found
Found a prompt... great!
>>> Sending...
.......
- my-gpio-expander requires []
Thanks, it works...