pbuyle

Most recent activity

• Latest Espruino build for Esp8266

  in ESP8266 • 8 years, 8 months

  

  Indeed, using baud rate 115200 and the board works. Thanks.

• Latest Espruino build for Esp8266

  in ESP8266 • 8 years, 8 months

  

  I've the same issue as @MrBambix after flashing on a NodeMCU devkit 0.9 (ESP-12 with 4Mb flash) with

  esptool.py --baud 460800 write_flash   --flash_freq 80m --flash_mode qio --flash_size 32m   0x0000 "boot_v1.4(b1).bin" 0x1000 espruino_esp8266_user1.bin 0x37E000 blank.bin
  

  When connecting with the IDE, I got a frozen terminal in the left-hand panel with only

  Connected
  >
  

  In the IDE log, I find this

  [...]
  Loaded code from storage.
  >>> Connecting...
  Set Slow Write = true
  [object Object]
  Connected [object Object]
  Found a prompt... great!
  >>> Sending...
  ---> "echo(0);\nconsole.log(\"<\",\"<<\",JSON.stringify(process.env),\">>\",\">\");echo(1);\n"
  Sending block "echo(0);\nconsol", wait 50ms
  Sent
  Sending block "e.log(\"<\",\"<<\",", wait 50ms
  Sent
  Sending block "JSON.stringify(", wait 50ms
  Sent
  Sending block "process.env),\">", wait 50ms
  Sent
  Sending block ">\",\">\");echo(1)", wait 50ms
  Sent
  Sending block ";\n", wait 50ms
  Sent
  >>> Sent
  WARNING: No result found - just got ""
  Device found (connectionId=12)
  >>> Connected to port /dev/ttyUSB0
  Sending block "d", wait 50ms
  Sent
  Sending block "d", wait 50ms
  Sent
  Sending block "d", wait 50ms
  Sent
  Sending block "d", wait 50ms
  Sent
  Sending block "d", wait 50ms
  Sent
  Sending block "d", wait 50ms
  Sent
  

  Note: my board look exactly like this