Wake on Twist settings

Posted on
  • Hi everyone,

    I've found that the twist settings are too sensitive for me.

    I've tried messing around with the twist threshold and the twist max Y settings but never had a Eureka moment.

    Can anyone ELI5 it for me? I would welcome settings recommendations as well.

    If there is another forum conversation about this topic I apologize. I tried to find it. :)

  • Pretty sure there has been conversations on this topic previously, but what I've found is that raising the threshold and lowering the timeout while leaving max Y alone gives me what I want. I'm currently using threshold 0.2 and have the timeout set to 500.

  • Thanks, I'll take those settings for a spin.

    I tried searching the forum for any keyword related to the topic but I didn't flip through every conversation manually.

  • I also found this forum post. Thanks for the suggestions. I also confirm that these settings give good results. The original settings were too sensitive for me resulting the screen to be on with almost every move of the arm. I am using firmware v15

    twist threshold: 0.2 (was 0.1)
    twist max y: -800 (unchanged)
    twist timeout: 500 (was 1000)

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview

Wake on Twist settings

Posted by Avatar for SandHamwich @SandHamwich