I use a BME280 sensor connected to my MDBT42Q . Temperature and pressure measurement is working fine, but humidity is always 0.
In contrast bme.hum_raw is greater 0, at my place currently 35406. Could there be a problem with the calibration function implementation in bme.js?
It could be there's an issue I guess. Does bme.dH appear to contain nonzero numbers?
Also, are you certain you have a BME280 sensor, and not a BMP280? I believe they are basically identical apart from the lack of humidity in the P
bme.dH is [ undefined, 0, 0, 0, 0, 0, 0 ].
As you are asking: In fact I´m not 100% sure, that I have a BME280. The breakout board has both labels: BMP280 and BME280. But you may be right, that in fact it´s only a BMP280.
Thanks for the hint!
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© Espruino, powered by microcosm.
Report a problem