Trouble with ESP32

Posted on
  • Hello!
    I have 2 ESP32 DevKit v1 by DOIT. Devices have same firmware. First device work is good. Second device have trouble on send code. Code come on board is wrong! I use one USB-cable. Why is it?

  • Your description code come on board is wrong is not very helpful.
    So check the usual problems:

    • powersupply not stable
    • reset the board manually several times
    • try with other baudrate for flashing
    • did you try to flash one of the examples from ESP-IDF ?
    • last not least, the board could be damaged

    Anyway, sounds like a problem of ESP32 and not of Espruino.
    Try to get some help here
    Please have in mind to give them a more detailled/helpful description of your problem.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview

Trouble with ESP32

Posted by Avatar for FunnyH @FunnyH