Espruino Web IDE on NPM (with Electron) #107

gfwilliams · 2025-02-10T12:09:59Z

gfwilliams
Feb 10, 2025
Maintainer

Posted at 2016-03-14 by @gfwilliams

Hi,

There's now a version of the Espruino Web IDE that runs under Node.js:

https://github.com/espruino/EspruinoWebIDE#installing-from-npm

It can be installed without Chrome, on Windows, Mac and Linux. At the moment it supports USB, Serial, and Bluetooth Low Energy.

So if you have a BBC Micro:bit or a Nordic device you've got Espruino running on, this is probably what you want (at least until more devices support Web Bluetooth).

espruino-discuss · 2025-02-10T12:10:02Z

espruino-discuss
Feb 10, 2025
Maintainer

Posted at 2016-03-15 by conor

This is great to see! Nearly works for me with Pico plugged into Raspberry Pi 3

Needed the following to install it:

sudo apt-get install libudev-dev
sudo npm install --unsafe-perms -g espruino-web-ide

But when I click Connect, I just get "Searching" in the ports popup. Tried with and without sudo. Also tried passing /dev/ttyACM0 as a parameter. No error printed out in terminal or inside the IDE's log.

Any ideas?

0 replies

gfwilliams · 2025-02-10T12:10:05Z

gfwilliams
Feb 10, 2025
Maintainer Author

Posted at 2016-03-15 by @gfwilliams

Try espruino-web-ide --dbg - I think this should give you a debugger window on the right-hand side where you can see errors reported.

I'd be 99% certain it's saying something like can't find serialport v47 - it's what happens when the version of node (node --version) doesn't match the version of electron, so the compiled libraries installed by npm don't work.

Sadly it seems to be a major problem with both nw.js and electron, but it's usually just fixed by upgrading node.js

0 replies

gfwilliams · 2025-02-10T12:10:08Z

gfwilliams
Feb 10, 2025
Maintainer Author

Posted at 2016-03-15 by @gfwilliams

https://github.com/atom/electron/blob/master/docs/tutorial/using-native-node-modules.md

0 replies

espruino-discuss · 2025-02-10T12:10:11Z

espruino-discuss
Feb 10, 2025
Maintainer

Posted at 2016-03-15 by conor

No joy with --dbg. Nothing new appeared.

But Node versioning sounds like the problem alright. I'm on 4.4.0 (Raspbian ships with 0.10.x)

0 replies

gfwilliams · 2025-02-10T12:10:15Z

gfwilliams
Feb 10, 2025
Maintainer Author

Posted at 2016-03-15 by @gfwilliams

Actually I just looked at this a bit more and it seems that you can npm install electron-rebuild, run it, and then it'll rebuild everything for electron's version. That will probably sort it out for you...

Looks like it can go in package.json so it all happens automatically, but I'm not 100% sure how to do that at the moment.

0 replies

espruino-discuss · 2025-02-10T12:10:18Z

espruino-discuss
Feb 10, 2025
Maintainer

Posted at 2016-03-15 by conor

No joy with that but it may be user error. I'll try again later.

0 replies

espruino-discuss · 2025-02-10T12:10:22Z

espruino-discuss
Feb 10, 2025
Maintainer

Posted at 2016-03-16 by conor

No success with starting back with completely clean slate (all node_modules and .node-gyp directories deleted) and just doing npm install espruino-web-ide. Now it won't even install.

pi@raspberrypi:~ $ npm install espruino-web-ide
npm WARN optional dep failed, continuing xpc-connection@0.1.4

> nslog@3.0.0 install /home/pi/node_modules/espruino-web-ide/node_modules/electron-rebuild/node_modules/nslog
> node-gyp rebuild

make: Entering directory '/home/pi/node_modules/espruino-web-ide/node_modules/electron-rebuild/node_modules/nslog/build'
  CXX(target) Release/obj.target/nslog/src/main.o
  CXX(target) Release/obj.target/nslog/src/nslog_linux.o
  SOLINK_MODULE(target) Release/obj.target/nslog.node
  COPY Release/nslog.node
make: Leaving directory '/home/pi/node_modules/espruino-web-ide/node_modules/electron-rebuild/node_modules/nslog/build'
-
> electron-prebuilt@0.36.11 postinstall /home/pi/node_modules/espruino-web-ide/node_modules/electron-prebuilt
> node install.js

|
> usb@1.1.1 install /home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb
> node-pre-gyp install --fallback-to-build

make: Entering directory '/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/build'
  CC(target) Release/obj.target/libusb/libusb/libusb/core.o
  CC(target) Release/obj.target/libusb/libusb/libusb/descriptor.o
  CC(target) Release/obj.target/libusb/libusb/libusb/hotplug.o
  CC(target) Release/obj.target/libusb/libusb/libusb/io.o
  CC(target) Release/obj.target/libusb/libusb/libusb/strerror.o
  CC(target) Release/obj.target/libusb/libusb/libusb/sync.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/poll_posix.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/threads_posix.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_usbfs.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_udev.o
  AR(target) Release/obj.target/usb.a
  COPY Release/usb.a
  CXX(target) Release/obj.target/usb_bindings/src/node_usb.o
  CXX(target) Release/obj.target/usb_bindings/src/device.o
  CXX(target) Release/obj.target/usb_bindings/src/transfer.o
  SOLINK_MODULE(target) Release/obj.target/usb_bindings.node
  COPY Release/usb_bindings.node
  COPY /home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/src/binding/usb_bindings.node
  TOUCH Release/obj.target/action_after_build.stamp
make: Leaving directory '/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/build'

> serialport@2.0.6 install /home/pi/node_modules/espruino-web-ide/node_modules/serialport
> node-pre-gyp install --fallback-to-build

make: Entering directory '/home/pi/node_modules/espruino-web-ide/node_modules/serialport/build'
  CXX(target) Release/obj.target/serialport/src/serialport.o
  CXX(target) Release/obj.target/serialport/src/serialport_unix.o
  CXX(target) Release/obj.target/serialport/src/serialport_poller.o
  SOLINK_MODULE(target) Release/obj.target/serialport.node
  COPY Release/serialport.node
  COPY /home/pi/node_modules/espruino-web-ide/node_modules/serialport/build/Release/node-v46-linux-arm/serialport.node
  TOUCH Release/obj.target/action_after_build.stamp
make: Leaving directory '/home/pi/node_modules/espruino-web-ide/node_modules/serialport/build'

> bluetooth-hci-socket@0.4.2 install /home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket
> node-gyp rebuild

make: Entering directory '/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/build'
  CXX(target) Release/obj.target/binding/src/BluetoothHciSocket.o
  SOLINK_MODULE(target) Release/obj.target/binding.node
  COPY Release/binding.node
make: Leaving directory '/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/build'

> espruino-web-ide@0.60.4 install /home/pi/node_modules/espruino-web-ide
> electron-rebuild


> bluetooth-hci-socket@0.4.2 install /home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket
> node-gyp rebuild

make: Entering directory '/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/build'
  CXX(target) Release/obj.target/binding/src/BluetoothHciSocket.o
  SOLINK_MODULE(target) Release/obj.target/binding.node
  COPY Release/binding.node
make: Leaving directory '/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/build'

> usb@1.1.1 install /home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb
> node-pre-gyp install --fallback-to-build

Unknown Runtime: 'electron'

node-pre-gyp ERR! install error
node-pre-gyp ERR! stack Error: Unknown Runtime: 'electron'
node-pre-gyp ERR! stack     at get_runtime_abi (/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/node-pre-gyp/lib/util/versioning.js:60:19)
node-pre-gyp ERR! stack     at Object.module.exports.evaluate (/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/node-pre-gyp/lib/util/versioning.js:249:19)
node-pre-gyp ERR! stack     at install (/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/node-pre-gyp/lib/install.js:138:31)
node-pre-gyp ERR! stack     at Object.self.commands.(anonymous function) [as install] (/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/node-pre-gyp/lib/node-pre-gyp.js:48:37)
node-pre-gyp ERR! stack     at run (/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/node-pre-gyp/bin/node-pre-gyp:79:30)
node-pre-gyp ERR! stack     at Object.<anonymous> (/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/node-pre-gyp/bin/node-pre-gyp:131:1)
node-pre-gyp ERR! stack     at Module._compile (module.js:409:26)
node-pre-gyp ERR! stack     at Object.Module._extensions..js (module.js:416:10)
node-pre-gyp ERR! stack     at Module.load (module.js:343:32)
node-pre-gyp ERR! stack     at Function.Module._load (module.js:300:12)
node-pre-gyp ERR! System Linux 4.1.18-v7+
node-pre-gyp ERR! command "/usr/local/bin/node" "/home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /home/pi/node_modules/espruino-web-ide/node_modules/bleat/node_modules/noble/node_modules/bluetooth-hci-socket/node_modules/usb
node-pre-gyp ERR! node -v v4.4.0
node-pre-gyp ERR! node-pre-gyp -v v0.6.4
node-pre-gyp ERR! not ok

npm ERR! Linux 4.1.18-v7+
npm ERR! argv "/usr/local/bin/node" "/home/pi/node_modules/espruino-web-ide/node_modules/electron-rebuild/node_modules/npm/bin/npm-cli.js" "rebuild" "--runtime=electron" "--target=0.36.11" "--arch=arm"
npm ERR! node v4.4.0
npm ERR! npm  v3.8.1
npm ERR! code ELIFECYCLE
npm ERR! usb@1.1.1 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the usb@1.1.1 install script 'node-pre-gyp install --fallback-to-build'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the usb package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node-pre-gyp install --fallback-to-build
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs usb
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls usb
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/node_modules/espruino-web-ide/node_modules/npm-debug.log

Process exited with code: 1
Error: Process exited with code: 1
    at ChildProcess.<anonymous> (/home/pi/node_modules/espruino-web-ide/node_modules/electron-rebuild/lib/spawn.js:55:26)
    at emitTwo (events.js:87:13)
    at ChildProcess.emit (events.js:172:7)
    at maybeClose (internal/child_process.js:827:16)
    at Socket.<anonymous> (internal/child_process.js:319:11)
    at emitOne (events.js:77:13)
    at Socket.emit (events.js:169:7)
    at Pipe._onclose (net.js:475:12)
npm ERR! Linux 4.1.18-v7+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "espruino-web-ide"
npm ERR! node v4.4.0
npm ERR! npm  v2.14.20
npm ERR! code ELIFECYCLE

npm ERR! espruino-web-ide@0.60.4 install: `electron-rebuild`
npm ERR! Exit status 255
npm ERR!
npm ERR! Failed at the espruino-web-ide@0.60.4 install script 'electron-rebuild'.
npm ERR! This is most likely a problem with the espruino-web-ide package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs espruino-web-ide
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!
npm ERR!     npm owner ls espruino-web-ide
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/npm-debug.log

0 replies

gfwilliams · 2025-02-10T12:10:25Z

gfwilliams
Feb 10, 2025
Maintainer Author

Posted at 2016-03-16 by @gfwilliams

Try again now - I'd added some extra code that called electron-rebuild automatically as had been suggested on the net - but it looks like it's broken.

(It seems to expect electron on the path, which is fine I guess if you installed it globally before, but it doesn't work for a simple npm install)

0 replies

espruino-discuss · 2025-02-10T12:10:29Z

espruino-discuss
Feb 10, 2025
Maintainer

Posted at 2016-03-16 by conor

It now builds again but still no serial ports.

I also tried

sudo electron-rebuild --version 0.36.11

giving

Couldn't find electron-prebuilt and no --node-module-version parameter set, always rebuilding

> nslog@3.0.0 install /usr/local/lib/node_modules/electron-rebuild/node_modules/nslog
> node-gyp rebuild


gyp ERR! clean error
gyp ERR! stack Error: EACCES: permission denied, unlink 'build/Makefile'
gyp ERR! stack     at Error (native)
gyp ERR! System Linux 4.1.19-v7+
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/electron-rebuild/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/lib/node_modules/electron-rebuild/node_modules/nslog
gyp ERR! node -v v4.4.0
gyp ERR! node-gyp -v v3.3.0
gyp ERR! not ok

npm ERR! Linux 4.1.19-v7+
npm ERR! argv "/usr/local/bin/node" "/usr/local/lib/node_modules/electron-rebuild/node_modules/npm/bin/npm-cli.js" "rebuild" "--runtime=electron" "--target=0.36.11" "--arch=arm"
npm ERR! node v4.4.0
npm ERR! npm  v3.8.1
npm ERR! code ELIFECYCLE
npm ERR! nslog@3.0.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the nslog@3.0.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the nslog package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs nslog
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls nslog
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /usr/local/lib/node_modules/npm-debug.log

Process exited with code: 1
Error: Process exited with code: 1
    at ChildProcess.<anonymous> (/usr/local/lib/node_modules/electron-rebuild/lib/spawn.js:55:26)
    at emitTwo (events.js:87:13)
    at ChildProcess.emit (events.js:172:7)
    at maybeClose (internal/child_process.js:827:16)
    at Process.ChildProcess._handle.onexit (internal/child_process.js:211:5)

I need to try on a non-RPi box to see if it's Pi or ARM specific.

0 replies

gfwilliams · 2025-02-10T12:10:32Z

gfwilliams
Feb 10, 2025
Maintainer Author

Posted at 2016-03-17 by @gfwilliams

Ahh - might be an idea. I haven't tried it on the Pi...

If only someone could come up with a serial port library that didn't need native modules. I would have thought just opening the file /dev/ttyACM0 would be good enough - although maybe it's too hard to do on Windows and Mac as well.

0 replies

espruino-discuss · 2025-02-10T12:10:36Z

espruino-discuss
Feb 10, 2025
Maintainer

Posted at 2016-03-17 by conor

Yeah it's a pain.

Just FYI - Exact same behaviour/error as the last one above with Node 4.2.6 on Fedora 23 x86-64 in a VBox VM.

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Espruino JavaScript

Espruino Web IDE on NPM (with Electron) #107

{{title}}

Replies: 11 comments

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Espruino JavaScript

Espruino Web IDE on NPM (with Electron) #107

gfwilliams Feb 10, 2025 Maintainer

Replies: 11 comments

espruino-discuss Feb 10, 2025 Maintainer

gfwilliams Feb 10, 2025 Maintainer Author

gfwilliams Feb 10, 2025 Maintainer Author

espruino-discuss Feb 10, 2025 Maintainer

gfwilliams Feb 10, 2025 Maintainer Author

espruino-discuss Feb 10, 2025 Maintainer

espruino-discuss Feb 10, 2025 Maintainer

gfwilliams Feb 10, 2025 Maintainer Author

espruino-discuss Feb 10, 2025 Maintainer

gfwilliams Feb 10, 2025 Maintainer Author

espruino-discuss Feb 10, 2025 Maintainer

gfwilliams
Feb 10, 2025
Maintainer

espruino-discuss
Feb 10, 2025
Maintainer

gfwilliams
Feb 10, 2025
Maintainer Author

gfwilliams
Feb 10, 2025
Maintainer Author

espruino-discuss
Feb 10, 2025
Maintainer

gfwilliams
Feb 10, 2025
Maintainer Author

espruino-discuss
Feb 10, 2025
Maintainer

espruino-discuss
Feb 10, 2025
Maintainer

gfwilliams
Feb 10, 2025
Maintainer Author

espruino-discuss
Feb 10, 2025
Maintainer

gfwilliams
Feb 10, 2025
Maintainer Author

espruino-discuss
Feb 10, 2025
Maintainer