esp32-s3 + ili_9488

You are reading a single comment by @fanoush and its replies. Click here to read the full conversation.

•

mr_zec

Hi, I have a question…
I don't know if I'm in the right place, but I have a problem with initializing the ILI_9488(hsd035577a5) screen.
It's about the ESP32-S3-WROOM-1 module.

My programming and connection knowledge is about 2/100.

This is my pinout configuration:

 [#define](https://forum.espruino.com/search/?q=%23define) TFT_MISO 14  // SDO(MISO)
[#define](https://forum.espruino.com/search/?q=%23define) TFT_MOSI 11  // SDI(MOSI)
[#define](https://forum.espruino.com/search/?q=%23define) TFT_SCLK 12  // SCK
[#define](https://forum.espruino.com/search/?q=%23define) TFT_CS   10  // Chip select control pin
[#define](https://forum.espruino.com/search/?q=%23define) TFT_DC    9  // Data Command control pin
[#define](https://forum.espruino.com/search/?q=%23define) TFT_RST  18  // Reset pin
[#define](https://forum.espruino.com/search/?q=%23define) TFT_BL(led)    5  // LED back-light control pin

I tryed Bodmers lib with many others but i failed.

Some pictures of the components are attached.

If you need any other information so you can help me, please be free to contact me.

Would really appreciate some help.

Thanks.

•

fanoush in reply to @mr_zec

I tryed Bodmers lib with many others but i failed.

If you mean this library https://github.com/Bodmer/TFT_eSPI then you are probably using Arduino? This is not Arduino forum. Arduino is not Espruino. Maybe this forum https://forum.arduino.cc/ is better for your question. Or maybe even this place https://github.com/Bodmer/TFT_eSPI/discussions

esp32-s3 + ili_9488

About

Espruino