Hello,
I just got my Pixel.js but I cannot use it. The following happens:
1) When I connect the Pixel.js with Power (doesn't matter if Battery or USB Power) I get a blank screen
2) When I press BTN1 short I get "DFU START" on the screen - but nothing more happens
3) When I try to flash firmware from espruino IDE and select DFUtarg as device, I get below "DFU START" the text "CONNECTED" but IDE shows an error message that flashing failed
4) When I keep pressing BTN1 after 1) I get on the screen the following text:
"LOCKUP
DFU ZY16
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
Hello,
I just got my Pixel.js but I cannot use it. The following happens:
1) When I connect the Pixel.js with Power (doesn't matter if Battery or USB Power) I get a blank screen
2) When I press BTN1 short I get "DFU START" on the screen - but nothing more happens
3) When I try to flash firmware from espruino IDE and select DFUtarg as device, I get below "DFU START" the text "CONNECTED" but IDE shows an error message that flashing failed
4) When I keep pressing BTN1 after 1) I get on the screen the following text:
"LOCKUP
DFU ZY16
RELEASE BTN1 FOR DFU
BTN1 TO BOOT
*======= >"
Anyone an idea how to fix that problem?
Best,
Mike