-
But even that 1.73 seconds per day would accumulate to quite large error
Well, it is also temperature dependent but as long as you wear the watch the temperature may not drift a lot. So if temperature is stable the daily drift of your specific crystal can be constant (?) so it could be compensated in software. This of course matters mainly if you cannot sync with phone/internet.
BTW there is also BLE service for time defined so one could have some accurate time source around (e.g. ESP32 connected to internet adverting this over BLE) and then have app on bangle to scan for it and sync the time.
fanoush-
BTW there is also BLE service for time defined so one could have some accurate time source around (e.g. ESP32 connected to internet adverting this over BLE) and then have app on bangle to scan for it and sync the time.
Wouldn't I need to manually unpair Bangle.js 2 from my phone, pair to that timesource, then unpair from timesource and pair with phone?
malaire
I might've reset the watch, I'm not sure. I'll have to recheck once I get my watch to work with Bluetooth again.
But even that 1.73 seconds per day would accumulate to quite large error since Gadgetbridge doesn't even have daily sync.