So, since I wasn't able to upload from the original .219 firmware through the Firmware Update app on the /apps page, I thought I'd try the Web IDE flasher method.
I'm now stuck an a screen with:
SW RESET
DFU 2V10.219
CHECK STORAGE
NO NEW FW
BANK0 INVALID
BTN1 = REBOOT
And nothing will get me past that.
Additionally, when selecting the Bangle.js 2 board in the Web IDE Flasher - Flash Firmware page, I get the error:
I had also tried downloading the zip and then going the Flash from File route, but I got another error about being unable to read the zip and then the watch showed a CONNECT ERROR.
Could someone please give me step by step instructions?
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
So, since I wasn't able to upload from the original .219 firmware through the Firmware Update app on the /apps page, I thought I'd try the Web IDE flasher method.
I'm now stuck an a screen with:
SW RESET
DFU 2V10.219
CHECK STORAGE
NO NEW FW
BANK0 INVALID
BTN1 = REBOOT
And nothing will get me past that.
Additionally, when selecting the Bangle.js 2 board in the Web IDE Flasher - Flash Firmware page, I get the error:
Sorry, the firmware update has failed.
The error was: Unable to download https://www.espruino.com/binaries/espruino_2v10_banglejs2.zip
Please try again, or check out the Troubleshooting page for what to do next.
I had also tried downloading the zip and then going the Flash from File route, but I got another error about being unable to read the zip and then the watch showed a CONNECT ERROR.
Could someone please give me step by step instructions?