You are reading a single comment by @fanoush and its replies.
Click here to read the full conversation.
-
Sun 2021.10.24
'when it works, now it doesn't for me'
Was able to perform the translate at 09:54 CST which produces a 2M pdf in seconds.
'google can translate pdf from Chinese to English quite well'
As this is a MAX2659 Maxim chip, wouldn't it be more likely that the content listed on the web is an initial translation from English to their language?
Robin
@fanoush
see links in this page https://docs.m5stack.com/en/unit/gps
there is the datasheet and commands are in another document "CASIC Multimode satellite navigation receiver protocol specification", google can translate pdf from Chinese to English quite well.
Also manufacturer has agps example on their web (when it works, now it doesn't for me)
same chip is in B5 fitness tracker , I tested few commands listed here
https://gist.github.com/fanoush/505a6f44532e4fdaadef4da5777d7777#file-b5-demo-js-L275
when the tracker arrived it had only gps and bds enabled, there is PCAS04 command to enable any combination of gps,glonass,bds and enabling glonass worked.
except setting refresh via PCAS02 I did not find any command to put it into some power saving mode as mentioned briefly in datasheet.