• I mean the espruino firmware, you previously had to install some espruino_XXX_microbit2.hex file from https://www.espruino.com/Download Current version is shown in bottom right corner when you connect via WebIDE or via typing process.env or process.version on left side. If you installed some cutting edge version you might hit some buggy version.

  • I mean the espruino firmware, you previously had to install some espruino_XXX_microbit2.hex file from https://www.espruino.com/Download

    Oh yes! I've done this previously.

    Current version is shown in bottom right corner when you connect via WebIDE or via typing process.env or process.version on left side

    I read 2v10.113
    In download page I see espruino_2v10_microbit2.hex and espruino_2v10.142_microbit2.hex as Cutting Edge build.

    Is it possible that I have installed the previous Cutting Edge Version (113) instead of 2V10?

About

Avatar for fanoush @fanoush started