-
Fri 2021.08.27
Hi @LethalLeafs Not a good way to start off the weekend as I'm sure you had set aside some fun time to play. Rats!
While I may not have all the answers, there are a few things we may try to get enough info to resolve this quickly.
Q1: Which Bangle hardware ver are we dealing with?
https://www.espruino.com/Bangle.js
https://www.espruino.com/Bangle.js2Bangle.js 2 only has a single button, while the original standard Bangle has 3 buttons
Q2: Does the console output of the Web IDE show anything of importance, is there BLE comm?
Upper right
Settings >> Console
Posting the content after the Initiaization Lines might be of some assistance
-
Now I realize we will need to get your Bangle responding first;
"LOW_MEMORY, MEMORY"
Follow along with this recent discussion
-
From Post #1 'I factory reset my watch'
What steps were followed, better yet, would you point to the paragraph of instructions used to perform the 'factory' reset please.
You are reading a single comment by @LethalLeafs and its replies.
Click here to read the full conversation.
Robin
@LethalLeafs
Hey guys, pretty big problem. Got my watch today, messed around with downloading some apps to it (just like 5 or 6 small ones, no memory-breaking downloads), and then downloaded a clock app to take the place of the default one. Once I chose it as the default clock in the settings, It only showed an error message on the bottom reading "LOW_MEMORY, MEMORY". I also realized that I could not access the menu by any means from the clock. I factory reset my watch (both with and without bootloader mode just incase), and now I only get a black screen right off of the logo disappearing.
What I know:
If for some reason it would be a problem with an app installed, the only two that I feel could have possibly caused the problem would be Gadgetbridge (which I don't believe would do this) and the clock I installed that supposedly doesn't work correctly on my watch, called Sliding Clock.