You are reading a single comment by @fanoush and its replies.
Click here to read the full conversation.
-
Hmm.. I may be past that point. iBand is not seeing the F07.
yes, iband needs original fw but if you don't know which one to restore it is pointless now. if you had second one still with original fw bought at same time that would help.
maybe there is another gpio for the backlight, so when it is dim you can try set 1 or 0 on another unused pins.
BTW I have now updated the example https://gist.github.com/fanoush/7f12afc474be509a37f13aa558e5f6dd with current code I have in my F10 and F07 now so you may test if you see any change with backlight (don't remember doing anything with that so it is unlikely).
the display driver is smaller and faster and there is clock as first screen
fanoush
Yes, it's back now, and I've already heavily borrowed your demo to make a basic watchface. But it's so dim you can't see it at all outside. I haven't updated the firmware from iBand.. will that restore it to factory (including the dual-zone program areas)?
Hmm.. I may be past that point. iBand is not seeing the F07.