Bug of Espruino IDE (not supporting UTF-8 comments)

You are reading a single comment by @user127815 and its replies. Click here to read the full conversation.

•

Robin in reply to @user127815

Okay, thanks that clears that up. re: 'E.getTemperature( )'

https://www.espruino.com/datasheets/STM32F411xE.pdf
p.116 50C seems to be on the low end of their test cal ranges

p.11 'The STM32F411xC/xE operate in the –40 to +105 °C temperature range'

p.32 3.30 Temperature sensor - Variation in internal temperature

Also note:

http://www.espruino.com/Reference#l_E_getTemperature
'Note: This is not entirely accurate and varies by a few degrees from chip to chip. It measures the die temperature, so when connected to USB it could be reading 10 over degrees C above ambient temperature.'

•

user127815 in reply to @Robin

Thanks for your help. I'm running another lap about the character encoding error.

About

Avatar for user127815 @user127815 started