I just tested with device I just have here - nrf52840 dongle and indeed have some issues with this if I connect over bluetooth. However when I connect over USB serial it worked. Can you try over serial console without using bluetooth console at all?
this was over serial
when tried bluetooth
Disconnected from Web Bluetooth, Dongle c56e
Found NRF52840Dongle, 2v08.156
Connected to Dongle c56e
I also tried without NRF.Disconnect - you need to disconenct after calling it, it prints
BLE Connected, queueing BLE restart for later
and should restart later but d is still 0 after reconnecting.
Strange, this worked previously. Not 100%, sometimes I saw this too, but mostly it worked fine. If this happened previously, after E.reboot() it worked.
Thanks @fanoush, Am I missing something as my MDBT42Q has no USB connector?
© Espruino, powered by microcosm.
Report a problem