You are reading a single comment by @Gordon and its replies.
Click here to read the full conversation.
-
Yes, you just use the image converter, but you'll end up with a
reasonably sized file for a 240x240x16 image.The easiest way is actually to do it using the IDE. Click on the 3
disc 'storage' icon in the middle of the screen, click 'Upload',
choose an image, then it'll be detected and will offer you some
options to convert it.Oh cool, didn't know it would ask for conversion when uploading so I was basically searching for the right image format and how to get to it.
However it would be also nice if all output from left side could be automatically saved to some log filePRs are welcome ;)
FransM
@Gordon
Yes, you just use the image converter, but you'll end up with a reasonably sized file for a 240x240x16 image.
The easiest way is actually to do it using the IDE. Click on the 3 disc 'storage' icon in the middle of the screen, click 'Upload', choose an image, then it'll be detected and will offer you some options to convert it.
PRs are welcome ;)