InlineC with NRF52832 on custom board (nrf_gpio_pin_write)

Thr 2020.04.02

Hi @benoit, although I am unable to provide a definitive answer, I am responding as the ones that most likely have that content have been busy in BangleLand, and most likely will respond by tomorrow. In the mean time, a couple of things really stick out.

As you mentioned 'custom' board, had you seen this comment yet?

'Note: This is an online service that is only provided for official Espruino boards.'
http://www.espruino.com/InlineC

I noticed that you have an official board from your other thread posts. Have you tried snippets of your custom code, to prove out whether the pin toggling may be done on a board we know is compiled for?

Also, had all the items beneath the heading 'Caveats' been read and understood. While 'inlineC' is incredibly fast, in my simple tests, found and understood the caveats mentioned there.

One item that might provide some insight is listed under:

Link under Examples:

http://www.espruino.com/Reference#l_E_getAddressOf

nRF52 Low Level Interface Library