You are reading a single comment by @Frida and its replies. Click here to read the full conversation.
    1. Remember to ground GPIO0 when you insert it to the USB to get in the bootmode.

    With esptool:

    1. Have you erase flash?
      Unplug and repeat 1.
    2. Have you written flash?
      as written in "README_flash.txt".
    3. Unplug and reinsert.
    4. Run ESPRUINO WEB IDE and set Baud rate to 115200.
    5. Then you are running.

    1 Attachment


Avatar for Frida @Frida started