Problem with module MPU6050

You are reading a single comment by @Robin and its replies. Click here to read the full conversation.

•

Ptitonio
Hello ,
when I save this code on my Pico or EspruiniWiFi :
```
*I2C1.setup({scl:B8,sda:B9}); 
    var mpu=require(MPU6050);*
```
the console return :
``` TypeError: Cannot read property 'length' of undefined in MPU6050
TypeError: Cannot read property 'length' of undefined
____ _ | |_ ___ ___ _ ||___ ___ | |_ -| . | _| | | | | . | ||_| || |_|||_|_|

|_| espruino.com 2v00 (c) 2018 G.Williams

Uncaught SyntaxError: Got '=' expected ',' at line 263 col 65 ...ction(bank, prefetchEnabled=false, userBank=false) {

^ ```
I tried other module successfully.
Is the MPU6050 module a problem?
Am I missing something?

Thank you for your help

•

Robin in reply to @Ptitonio

Sat 2019.11.16

Hi @Ptitonio,

'I tried other module successfully'

Which module did you have success with?

I just checked the sample script:

http://www.espruino.com/MPU6050

and it appears there is no binding of the pins for I2C to the MPU6050 using the connect() function. Is all the code actually provided in #1?

Also, the pin labeling L#1 scl,sda needs another look as the pin numbers are different between devices:

for instance
http://www.espruino.com/Pico

Formatting help suggestion: It appears the reason for the block within the three backticks is not displaying correctly, is that this line 'TypeError: Cannot read property 'length'' needs to start on the next line following the backticks. Both opening and closing backtick group needs to be on its own line.

About

Avatar for Robin @Robin started