You are reading a single comment by @allObjects and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@allObjects
For an upcoming project with a Pixl in an case, I need internal connectors to stay in Pixl's spirit: stay within footprint... also from the side... and at the same time keep Pixl the way it is.
Some soldering turned out cleaner. The side with for A0..A5 was a bit more challenging as you can see on the partially fried pin strip. The connector housings need also some modification that I performed using diamond files... btw. also very helpful w/ 3D printed things.
@Gordon, it would be nice to have extra through holes free for the pins - similar as in the Puck. I know, space is a challenge, at least for some of the pins, but for others it is not at all, such as A0..A5. Yes, I could remove the Arduino headers... but I intentionally wanted to keep them.
2 Attachments