running ble on ESP-IDF release 3.0,

My first test.
Download the files from here: http://microcosm.app/out/DsGCh
I threw the files on esp32 and started collecting my ruuvi tags.
My ruuvi tags emit raw sensor data, so no connection is required.
It all runs stable.
Good work.

 
WARNING: check error not implemented yet:0
WARNING: Stop scan successfully
WARNING: check error not implemented yet:0
found devices:  7
count: 14
   Sted  Rssi  Temp  Humi   Dewi  Bati
    Ude: -90  13.35  87.5  11.33  2971
Drivhus: -77  16.98  73.5  12.23  2977
    Bad: -78  23.05  45.0  10.52  2977
   Stue: -85  23.15  47.5  11.42  2959
   test: -95  22.20  47.5  10.55  2947
  test1: -75  23.04  46.5  10.99  3181
 
WARNING: check error not implemented yet:0
WARNING: Stop scan successfully
WARNING: check error not implemented yet:0
found devices:  8
count: 15
   Sted  Rssi  Temp  Humi   Dewi  Bati
    Ude: -86  13.33  87.0  11.22  2989
Drivhus: -78  16.97  74.0  12.32  2983
    Bad: -79  23.05  45.0  10.52  2983
   Stue: -82  23.15  47.5  11.42  2947
   test: -89  22.20  47.5  10.55  2947
  test1: -72  23.03  46.5  10.99  3187
 
WARNING: check error not implemented yet:0
WARNING: Stop scan successfully
WARNING: check error not implemented yet:0
found devices:  7
count: 16
   Sted  Rssi  Temp  Humi   Dewi  Bati
    Ude: -86  13.33  87.0  11.22  2989
Drivhus: -74  16.96  74.0  12.31  2977
    Bad: -81  23.05  45.0  10.52  2983
   Stue: -83  23.15  47.5  11.42  2953
   test: -89  22.20  47.5  10.55  2947
  test1: -74  23.03  46.5  10.99  3181