Espruino on ESP8285

Posted on Wed 18th, April 2018

• #1

user88968
Just a note that I was able to install Espruino on our 'Vanguard' reference platform (a $2.50 NodeMCU-M from doit.am having an ESP8285 - which is an ESP8266 with built-in 1Meg Flash) using the following from an Ubuntu 17.10 console, after cd-ing to the espruino_1v96_esp8266 folder of the Espruino download.
```
esptool.py --port /dev/ttyUSB0 --baud 115200 erase_flash

esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash \
  --flash_freq 40m --flash_mode dout --flash_size 1MB \
  0x0000 "boot_v1.6.bin" 0x1000 espruino_esp8266_user1.bin \
  0xFC000 esp_init_data_default.bin 0xFE000 blank.bin
```
I am then able to connect to the shell by running GNU Screen like...
```
screen /dev/ttyUSB0 115200
```
• #2

Jean-Philippe_Rey

Thank you, it helped me flashing Espruino to a Sonoff RF R2 POWER V1.3!

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.