You are reading a single comment by @Vladimir and its replies. Click here to read the full conversation.
  • Hi, I'm dissapointed with the last firmware.
    1.My Espruino WIFI does not want to start the code on startup (I've changed E.On to Function onInit).
    2.The board sometimes looses connection to the IDE while uploading the code. The connection button is still on but progressstatus is stoping on the half while sending the code

    P.S. After hours of experimenting I've found the way how to launch the code on startup. I use both E.on('init'... and function onInit(){}. E.on just calls the function onInit. That was the only way to lauch on startup. I think it's quite strange. Tested with 2 Espruino WIFI boards. Both worked fine with just E.on... untill upgrade


Avatar for Vladimir @Vladimir started