Good day! The problem is this, when I begin to ship in esp32 code starts to take off error the port. If loading and not hung or not started endless reboot, give the command save(). The module then runs erratically or not work at all. What could be wrong?
I connected SIM800l on usart2.
What does it all mean?
_____ _
| __|___ ___ ___ _ _|_|___ ___
| __|_ -| . | _| | | | | . |
|_____|___| _|_| |___|_|_|_|___|
|_| http://espruino.com
1v94 Copyright 2016 G.Williams
Espruino is Open Source. Our work is supported
only by sales of official boards and donations:
http://espruino.com/Donate
>E (143702) uart: uart_read_bytes(857): uart driver error
E (144755) uart: uart_read_bytes(857): uart driver error
E (145676) uart: uart_read_bytes(857): uart driver error
E (146572) uart: uart_read_bytes(857): uart driver error
E (147501) uart: uart_read_bytes(857): uart driver error
E (148399) uart: uart_read_bytes(857): uart driver error
E (149339) uart: uart_read_bytes(857): uart driver error
E (150298) uart: uart_read_bytes(857): uart driver error
E (151186) uart: uart_read_bytes(857): uart driver error
E (152153) uart: uart_read_bytes(857): uart driver error
E (153113) uart: uart_read_bytes(857): uart driver error
E (154031) uart: uart_read_bytes(857): uart driver error
E (154953) uart: uart_read_bytes(857): uart driver error
E (155851) uart: uart_read_bytes(857): uart driver error
E (156752) uart: uart_read_bytes(857): uart driver error
E (157726) uart: uart_read_bytes(857): uart driver error
E (158715) uart: uart_read_bytes(857): uart driver error
E (159663) uart: uart_read_bytes(857): uart driver error
E (160610) uart: uart_read_bytes(857): uart driver error
E (161517) uart: uart_read_bytes(857): uart driver error
E (162416) uart: uart_read_bytes(857): uart driver error
E (163313) uart: uart_read_bytes(857): uart driver error
E (164250) uart: uart_read_bytes(857): uart driver error
E (165169) uart: uart_read_bytes(857): uart driver error
E (166059) uart: uart_read_bytes(857): uart driver error
E (166962) uart: uart_read_bytes(857): uart driver error
E (167873) uart: uart_read_bytes(857): uart driver error
E (168808) uart: uart_read_bytes(857): uart driver error
E (169747) uart: uart_read_bytes(857): uart driver error
E (170654) uart: uart_read_bytes(857): uart driver error
E (171576) uart: uart_read_bytes(857): uart driver error
E (172596) uart: uart_read_bytes(857): uart driver error
E (173577) uart: uart_read_bytes(857): uart driver error
E (174530) uart: uart_read_bytes(857): uart driver error
E (175461) uart: uart_read_bytes(857): uart driver error
E (175878) uart: uart_read_bytes(857): uart driver error
E (176863) uart: uart_read_bytes(857): uart driver error
E (177771) uart: uart_read_bytes(857): uart driver error
E (178677) uart: uart_read_bytes(857): uart driver error
E (179636) uart: uart_read_bytes(857): uart driver error
E (180594) uart: uart_read_bytes(857): uart driver error
E (181495) uart: uart_read_bytes(857): uart driver error
E (182449) uart: uart_read_bytes(857): uart driver error
E (183385) uart: uart_read_bytes(857): uart driver error
E (184302) uart: uart_read_bytes(857): uart driver error
E (185223) uart: uart_read_bytes(857): uart driver error
E (186129) uart: uart_read_bytes(857): uart driver error
E (187039) uart: uart_read_bytes(857): uart driver error
E (188013) uart: uart_read_bytes(857): uart driver error
E (188986) uart: uart_read_bytes(857): uart driver error
E (189928) uart: uart_read_bytes(857): uart driver error
E (190994) uart: uart_read_bytes(857): uart driver error
=undefined
>save()
=undefined
Erasing Flash..................
Writing.................................................
Compressed 80000 bytes to 47658
Checking...
Done!
E (212612) uart: uart_read_bytes(857): uart driver error
Running onInit()...
>
OK
CODE:
var server = "m14.cloudmqtt.com";
var options = {
client_id : "random",
keep_alive: 60,
clean_session: true,
port: 15577,
username: "ciugiy**",
password: "eYV1ivUWk***",
protocol_name: "MQTT",
protocol_level: 4,
};
var mqtt = require("MQTT").create(server, options);
Serial2.setup(115200, { tx: D4, rx: D15 });
var ATSMS;
var sms;
function sms_send_data(text){
var i=0;
var number =['+79216444***'];
var interval_init = setInterval(function(){
if(i<number.length){
sms.send(number[i],text);
print("send number : "+number[i]);
i++;
}
if(i == number.length){
clearInterval(interval_init);
}
}, 5000);
}
function Start_MQTT(){
console.log("Connecting to SIM900 module and MQTT");
var i = 20;
var reboot_i = setInterval(function () {
i--;
console.log("Reboot time: "+i);
if(i<0){
clearInterval(reboot_i);
console.log("Reboot ESP32!>>>");
ESP32.reboot();
}
}, 2000);
var gprs = require('SIM900').connect(Serial2, D22, function(err) {
if (err) throw err;
gprs.connect('internet', ' ', ' ', function(err) {
if (err) throw err;
gprs.getIP(function(err, ip) {
if (err) throw err;
console.log('IP:' + ip);
mqtt.on('connected', function() {
print("connect!!!");
clearInterval(reboot_i);
mqtt.subscribe("door");
mqtt.publish("IP", ip);
setTimeout(function() {
print("mqtt connect");
sms_init();
}, 5000);
});
// mqtt.on('publish',mqttMessage);
mqtt.on('publish', function (pub) {
console.log("topic: "+pub.topic);
console.log("message: "+pub.message);
});
mqtt.on('disconnected', function() {
console.log("MQTT disconnected... reconnecting.");
setTimeout(function() {
print("mqtt reconnect");
mqtt.connect();
}, 3000);
});
if(ip>0){
setTimeout(function() {
print("mqtt connect");
mqtt.connect();
}, 4000);
}
});
});
});
}
function Start_modem(){
Serial2.println("AT+CFUN=1,1");
Serial2.println("AT+CLIP=1");
var connection = setInterval(function(){ Serial2.println("AT+COPS?");},2000);
Serial2.on('data', function (data) {
print(data);
if(data.indexOf("+COPS: 0,0,")>-1){
clearInterval(connection);
print("modem start");
Serial2.println("AT+CSQ");
Serial2.println("AT+CBC");
Start_MQTT();
}
if(data.indexOf("+CSQ: ")>-1){
var d = data.substr(data.indexOf("+")+1,40);
var GSM_signal = d.substring(d.indexOf(" ")+1,d.indexOf(","));
print("GSM_signal : "+ GSM_signal);
}
});
}
function sms_init(){
ATSMS = require("ATSMS");
sms = new ATSMS(Serial2);
sms.init(function(err) {
if (err) throw err;
console.log("Initialised!");
sms.list("ALL", function(err,list) {
if (err) throw err;
if (list.length)
console.log(list);
else
console.log("No Messages");
});
sms.on('message', function(msg) {
console.log("Got message #",msg);
sms.get(msg, function(err, msg) {
// if (err) throw err;
print("Read message", msg);
var txt = msg.text.toLowerCase();
print("txt : "+txt);
if (txt==="on") print("LED1.set()");
if (txt==="off") print("LED1.reset()");
// delete all messages to stop us overflowing
sms.delete("ALL");
});
});
sms_send_data('System reboot and start!');
});
}
function onInit() {
Start_modem();
}
And take off that scary things
____ _
| __|___ ___ ___ _ _|_|___ ___
| __|_ -| . | _| | | | | . |
|_____|___| _|_| |___|_|_|_|___|
|_| http://espruino.com
1v95 Copyright 2017 G.Williams
Espruino is Open Source. Our work is supported
only by sales of official boards and donations:
http://espruino.com/Donate
E (182428) uart: uart_read_bytes(857): uart driver error
E (183528) uart: uart_read_bytes(857): uart driver error
E (184428) uart: uart_read_bytes(857): uart driver error
E (185428) uart: uart_read_bytes(857): uart driver error
E (186328) uart: uart_read_bytes(857): uart driver error
E (187328) uart: uart_read_bytes(857): uart driver error
E (188228) uart: uart_read_bytes(857): uart driver error
E (189228) uart: uart_read_bytes(857): uart driver error
E (190128) uart: uart_read_bytes(857): uart driver error
E (191028) uart: uart_read_bytes(857): uart driver error
E (191928) uart: uart_read_bytes(857): uart driver error
E (192928) uart: uart_read_bytes(857): uart driver error
E (193828) uart: uart_read_bytes(857): uart driver error
E (194728) uart: uart_read_bytes(857): uart driver error
E (195629) uart: uart_read_bytes(857): uart driver error
E (196629) uart: uart_read_bytes(857): uart driver error
E (197629) uart: uart_read_bytes(857): uart driver error
E (198629) uart: uart_read_bytes(857): uart driver error
E (199529) uart: uart_read_bytes(857): uart driver error
E (200529) uart: uart_read_bytes(857): uart driver error
E (200729) uart: uart_read_bytes(857): uart driver error
E (201729) uart: uart_read_bytes(857): uart driver error
E (202629) uart: uart_read_bytes(857): uart driver error
E (203529) uart: uart_read_bytes(857): uart driver error
E (204429) uart: uart_read_bytes(857): uart driver error
E (205429) uart: uart_read_bytes(857): uart driver error
E (206329) uart: uart_read_bytes(857): uart driver error
E (207329) uart: uart_read_bytes(857): uart driver error
E (208229) uart: uart_read_bytes(857): uart driver error
E (209129) uart: uart_read_bytes(857): uart driver error
E (210129) uart: uart_read_bytes(857): uart driver error
E (211029) uart: uart_read_bytes(857): uart driver error
E (212029) uart: uart_read_bytes(857): uart driver error
E (212929) uart: uart_read_bytes(857): uart driver error
E (213929) uart: uart_read_bytes(857): uart driver error
E (214829) uart: uart_read_bytes(857): uart driver error
E (215829) uart: uart_read_bytes(857): uart driver error
E (216729) uart: uart_read_bytes(857): uart driver error
E (217729) uart: uart_read_bytes(857): uart driver error
E (218629) uart: uart_read_bytes(857): uart driver error
E (219529) uart: uart_read_bytes(857): uart driver error
Guru Meditation Error of type LoadProhibited occurred on core 0. Exception was unhandled.
Register dump:
PC : 0x40087593 PS : 0x00060033 A0 : 0x8008622e A1 : 0x3ffb0540
A2 : 0x0000001d A3 : 0x00060023 A4 : 0x800859fc A5 : 0x3ffdf080
A6 : 0x00000003 A7 : 0x00060a23 A8 : 0x00000002 A9 : 0x3ffb2980
A10 : 0x3ffb0b0c A11 : 0x00000001 A12 : 0x00000001 A13 : 0x00000001
A14 : 0x3ffb2980 A15 : 0x3ffdf664 SAR : 0x00000018 EXCCAUSE: 0x0000001c
EXCVADDR: 0x0000002d LBEG : 0x4000c349 LEND : 0x4000c36b LCOUNT : 0xffffffff
Backtrace: 0x40087593:0x3ffb0540 0x4008622b:0x3ffb0560 0x400850b1:0x3ffb0580 0x40087355:0x3ffb05a0 0x401248eb:0x3ffb05c0 0x40081715:0x3ffb0600
================= CORE DUMP START =================
9BsAAAkAAAB0AQAA
rFD9P/BO/T+gUP0/
8E79P0BQ/T+8AQAA+Cf7P/gn+z+sUP0/8Cf7PxQAAAD0QCqhIKfLQqxQ/T8AAAAA
BQAAAPzu/D9lc3BydWlub1Rhc2sAslEAAAAAAKBQ/T8AAAAAIQAGAAUAAAAAAAAA
MO36PwAAAAAAAAAAnGwVQAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAkIUV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cNL8P3DT/D9XMbo+lCf7P5Qn+z8Y/fo/jCf7PxkAAABBoL25yOwm5hj9+j8AAAAA
AAAAAODP/D9JRExFAGGSF4Cs7opv17wAAAAAANzT/D8AAAAAIQAGAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAjwv1
2BQIQMRnEkAwCAYAuF0IgDDT/D8IAAAAAQAAACMABgAY/fo/AQAAAAAAAADYM/s/
ENP8PwAAAAAgCAYAIQAGALD6+j8kCPs/IAcGAAAAAABw0/w/AAAAAAAAAAAAAAAA
AAAAANUWCECw+vo/AGoIQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAUNP8PwAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAABw0/w/AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAfNP8PwAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==
4Oz8P/Dq/D/U7Pw/
8Or8P3Ds/D+JVgMAgCf7P4An+z/g7Pw/eCf7PwcAAADc4fw/3OH8P+Ds/D/U4fw/
EgAAANji/D90aVQAjUNtOkIXbfDxfvYA////f9Ts/D8AAAAAIQAGABIAAAABAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAlUwC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8Nv8P5Da/D/k2/w/
kNr8P4Db/D8AAAAAbCf7P2wn+z/w2/w/ZCf7PxgAAADA/vo/wP76P/Db/D+4/vo/
AQAAAOjT/D9UbXIgU3ZjAFswafV2+ykAAAAAAOTb/D8AAAAAIQAGAAEAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACT+i
2BQIQGNpCEAwAAYAAAAAAFDb/D8AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABjaQiA
INv8P4gp+z8AAAAAIQAAAJz7+j8BAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAANUWCECc+/o/AGoIQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAgNv8PwAAAAAAAAAA
AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAACM2/w/AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAA==
rM79PxDN/T+gzv0/
EM39P0DO/T+ZQmOvjGD9PyDq+j+szv0/HCf7PwQAAADIw/0/yMP9P6zO/T/Aw/0/
FQAAAKTE/T9wbVQAQ6BFX3V5WNHk4JMA////f6DO/T8AAAAAIQAGABUAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA/VDO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hGD9P8Be/T94YP0/
wF79PxBg/T/0WhGGXN/9P7TO/T+EYP0/HCf7PwUAAABUUv0/VFL9P4Rg/T9MUv0/
FAAAAHxY/T9ldmVudFRhc2sAAIAnYQsAAAAAAHhg/T8AAAAAIQAGABQAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA+ECC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VN/9P7Dd/T9I3/0/
sN39P+De/T+/9svLsGP9P4xg/T9U3/0/HCf7PwMAAADU0P0/1ND9P1Tf/T/M0P0/
FgAAAEzR/T9ydFQAMgLtH2oePWTKm/0A////f0jf/T8AAAAAIQAGABYAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA/Tns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qGP9P/B8/T+Yfv0/
8Hz9PzB+/T//////JCf7P1zf/T+oY/0/HCf7PwIAAAA0aP0/NGj9P6hj/T8saP0/
FwAAAJxu/T93aWZpAP////////////8AAAAAAJh+/T8AAAAAIQAGABcAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA////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GOr6P4Do+j8M6vo/
gOj6P6Dp+j+5GiJXtM79PyQn+z8Y6vo/HCf7PwEAAADo5fo/6OX6Pxjq+j/g5fo/
GAAAABDm+j9pcGMwAE7J0kmt6zKi5ccAAAAAAAzq+j8AAAAAIQAGABgAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFjj+j/A4/o/KOT6PwAAAAAAAAAA
AQAAAAAAAABQKUA/AAAAAEgdAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA8lAK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================= CORE DUMP END =================
E (47003) esp_core_dump: Skipped 1 tasks with bad TCB!
E (47047) esp_core_dump: Crashed task has been skipped!
Rebooting...
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0008,len:8
load:0x3fff0010,len:1932
ho 0 tail 12 room 4
load:0x40078000,len:10012
load:0x40080000,len:252
entry 0x40080034
Loading 24142 bytes from flash...
Running onInit()...
>½µ;
Uncaught SyntaxError: Got -= expected EOF
at line 1 col 1
-=default false;
OK
OK
=undefined
>save()
=undefined
Erasing Flash..................
Writing..............................
Compressed 80000 bytes to 27869
Checking...
Done!
Running onInit()...
ATE0
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
Good day! The problem is this, when I begin to ship in esp32 code starts to take off error the port. If loading and not hung or not started endless reboot, give the command save(). The module then runs erratically or not work at all. What could be wrong?
I connected SIM800l on usart2.
CODE:
And take off that scary things
What does it all mean?