It takes some seconds to connect the AP
>require('ESP8266').reboot(); =undefined > ets Jan 8 2013,rst cause:2, boot mode:(3,6) load 0x40100000, len 2408, room 16 tail 8 chksum 0xe5 load 0x3ffe8000, len 776, room 0 tail 8 chksum 0x84 load 0x3ffe8310, len 632, room 0 tail 8 chksum 0xd8 csum 0xd8 2nd boot version : 1.6 SPI Speed : 80MHz SPI Mode : QIO SPI Flash Size & Map: 32Mbit(1024KB+1024KB) jump to run user1 @ 1000 âìnìròn|ìll`ârlþ _____ _ | __|___ ___ ___ _ _|_|___ ___ | __|_ -| . | _| | | | | . | |_____|___| _|_| |___|_|_|_|___| |_| http://espruino.com 1v95.3493 Copyright 2017 G.Williams Espruino is Open Source. Our work is supported only by sales of official boards and donations: http://espruino.com/Donate Flash map 4MB:1024/1024, manuf 0xe0 chip 0x4016 >require('Wifi').getIP(); ={ "ip": "0.0.0.0", "netmask": "0.0.0.0", "gw": "0.0.0.0", "mac": "5c:cf:7f:c1:12:0b" } >require('Wifi').getIP(); ={ "ip": "192.168.194.121", "netmask": "255.255.255.0", "gw": "192.168.194.1", "mac": "5c:cf:7f:c1:12:0b" } >
@MaBe started
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
It takes some seconds to connect the AP