SSD1306 doesn't work on ESP32?

You are reading a single comment by @Aifer and its replies. Click here to read the full conversation.

•

JumJum

If there is a pulse only, replacing this by 10 times on/off is a bit strange.

•

Aifer in reply to @JumJum

eg. digitalPulse(A0,1,5); pulses A0 high for 5ms. digitalPulse(A0,1,[5,2,4]); pulses A0 high for 5ms, low for 2ms, and high for 4ms.

It seems that digitalPulse(rst,0,10) sets rst pin( rst = 1) , and then resets it for 10ms(rst = 0), at last sets it again(rst = 1).

Yet, it doesn't work.

About

Avatar for Aifer @Aifer started