You are reading a single comment by @Gordon and its replies.
Click here to read the full conversation.
-
Well it's neat that they are undertaking that!
So I have some good news. Sometimes it's the simple answer... I've got it running with the regular f411re bin.
Looking at the schematics of the Nucleo 144 board it shows the serial RX/TX connected to PA2/3 (USART2) and the two pin header on the ST-Link (CN5). But they are actually connected to USART3! Great! So simply jumping the PBA2/3 to the RX/TX on the ST-Link is working and I can get a serial terminal.
I'm trying to switch to USART3 in the Board file but looks like USART3 is not defined in the libs. No worries for what I'm trying to design, but it would be nice to setup a proper board file for this new Nucleo so I can submit a PR to your Espruino repo.
user63214
@Gordon
Just heard back from ST - at the moment it seems there is no version of the 'Low Level' libs for the F4 (it's just the L4) - but this should come in the next 6 months:
https://github.com/espruino/Espruino/pull/1045