Thanks Gordon. However, just adding the pinout diagrams likely isn't enough. Just point out in big letters (before you link to the pinouts) that now that there are 4+ boards, the chances of any of the reference code working generically is low. People should be warned that any code they find in the reference section needs to be checked against the pinouts for their particular board.
At least, that was my experience. The first few examples I found in the reference section all failed. It's understandable of course, just saying that a little extra care in your docs up front will likely go along way.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
Thanks Gordon. However, just adding the pinout diagrams likely isn't enough. Just point out in big letters (before you link to the pinouts) that now that there are 4+ boards, the chances of any of the reference code working generically is low. People should be warned that any code they find in the reference section needs to be checked against the pinouts for their particular board.
At least, that was my experience. The first few examples I found in the reference section all failed. It's understandable of course, just saying that a little extra care in your docs up front will likely go along way.