You are reading a single comment by @Ollie and its replies. Click here to read the full conversation.
  • Something like this --port /dev/tty.SLAB_USBtoUART --baud 460800 erase_flash

    Note there is a different flashing command for smaller boards - 512k? Check the README_flash.txt included in the build's .tgz to make sure you're using the right command for your board.

  • --port /dev/tty.SLAB_USBtoUART --baud 460800 erase_flash

    Thanks a lot. Everthing works fine so far.


Avatar for Ollie @Ollie started