ESP8266 Wiring Questions

You are reading a single comment by @tve and its replies. Click here to read the full conversation.

•

tve
Sorry if my earlier email was terse. My canonical esp8266 design has:
- LM3671 switching regulator with 4.7uF pre and 22uF post regulation cap, and 2.2uH inductor (all 0805 SMD)
- LED and 1K pull-up on gpio0 and gpio2
- 10K pull-down on gpio15
- 10k pull-up on ch_pd and on reset (or tie ch_pd high)

About

Avatar for tve @tve started