• Hi all I have a wee project to interface SDi-12 protocol to Espruino.

    SDI-12 is a arcane protocol used in environmental sensing. It consists of 2 wires: data and ground and runs at 1200 baud. The bus is bidirectional, and the logger is the master, and the sensors are slave devices on the bus. https://en.wikipedia.org/wiki/SDI-12

    As we often find someone has done this with the Arduino
    http://sdiserial-arduino-sdi-12.readthed­ocs.org/en/latest/

    One challenge is as yet I can't find cheap hardware to test against.
    My customer is lending me a test device, so if your happy to code I can't test.

    I don't have a big budget as I'm not being paid for the project I'm pitching.
    I'm happy to pay by bank transfer or by kit (e.g purchase Any hardware or software).

    Once development is done I/developer will contribute the module to Espruino Lib.

    Hope this is of interest to someone in or knowen to the community.
    BTW I have @Gordon 's approval to use the forum for this request.

    Lawrence

About