USB HID Support on Pico!

I've managed to make some progress on Windows. I had to uninstall/delete the ST Driver from inside Device Manager. Once I did that and unplugged/plugged the Pico, a USB HID device appeared and installed. However it does not work (This device cannot start. (Code 10) {Operation Failed} The requested operation was unsuccessful.)

These are the logs from Windows:

Driver Service Added (usbser)
Driver Management has concluded the process to add Service usbser for Device Instance ID USB\VID_0483&PID_5740\00000000001A with the following status: 0.

Device installed (stmcdc.inf)
Driver Management concluded the process to install driver stmcdc.inf_amd64_9422b577b75e16b8\stmcdc­.inf for Device Instance ID USB\VID_0483&PID_5740\00000000001A with the following status: 0x0.

Device deleted
Device USB\VID_0483&PID_5740\00000000001A was deleted.
Class Guid: {4D36E978-E325-11CE-BFC1-08002BE10318}

Device Configured (input.inf)
Device USB\VID_0483&PID_5740\00000000001A was configured.

Driver Name: input.inf
Class Guid: {745A17A0-74D3-11D0-B6FE-00A0C90F57DA}
Driver Date: 06/21/2006
Driver Version: 6.3.9600.17041
Driver Provider: Microsoft
Driver Section: HID_Inst.NT
Driver Rank: 0xFF3101
Matching Device Id: USB\Class_03&SubClass_01
Outranked Drivers: input.inf:USB\Class_03:00FF3202
Device Updated: false

Device not started (Hid Usb)
Device USB\VID_0483&PID_5740\00000000001A had a problem starting.

Driver Name: input.inf
Class Guid: {745A17A0-74D3-11D0-B6FE-00A0C90F57DA}
Service: HidUsb
Lower Filters: 
Upper Filters: 
Problem: 0xA
Status: 0x0