REV B: Will be sent out shortly for fabrication - please to give comments and point out flaws with haste :-)
Key features:
Both sides now have lables for the pins. Packages are marked. Traces for TSSOPs are not missing.
SOT-89 area is labled as such.
Better labeling of power and ground traces
The exposed power trace now has the solder mask covering the edges, to remind you that it's a power trace.
New mounting hole near top left, as that side previously didn't have enough mounting holes, so if you put a leg in each hole, it'd fall over. Now it won't.
The MSOP/DFN area now actually can accept DFN. The most interesting ones are the TCS3*** color sensors which are only available in DFN-6 (except for one awful one in SOIC-8, that outputs in frequency :-( - where's the fun in that?!)
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
REV B: Will be sent out shortly for fabrication - please to give comments and point out flaws with haste :-)
Key features:
Both sides now have lables for the pins. Packages are marked. Traces for TSSOPs are not missing.
SOT-89 area is labled as such.
Better labeling of power and ground traces
The exposed power trace now has the solder mask covering the edges, to remind you that it's a power trace.
New mounting hole near top left, as that side previously didn't have enough mounting holes, so if you put a leg in each hole, it'd fall over. Now it won't.
The MSOP/DFN area now actually can accept DFN. The most interesting ones are the TCS3*** color sensors which are only available in DFN-6 (except for one awful one in SOIC-8, that outputs in frequency :-( - where's the fun in that?!)