Crystals troubleshooting

So, I'm having issues with my crystal not working..

Here's the actual schematic and crystal:

XRCGB26M000F3M00R0: Crystal 26.0000MHz, 30ppm, 6pF, 150 Ohm

I'm pretty sure that I used the exact same model (on crystal and caps) that I found in a reference design for the micro (cc430f5137).

My oscilloscope does not see any frequency for the crystal.

A couple of questions:

1. Can one measure from ground to one of the outputs, or will the probe need to be between the xtal in/out?
   
2. When the datasheet says floating, would connecting it to ground inhibit the crystal?