Tried 8/5 bigram build "again" today and the program still "hangs"
On/off, for the next few weeks, I will be trying again to see if, by some chance,
"updated Bigram firmware" might work on my chip.
Too bad, if there isn't a reference from my purchased Espruino serial number or markings on the STM chip to ascertain if the chips can take the bigram firmware or not. Better yet, a yes/no diagnostic with flash/ram testing in the upper 16K
For now, I can live with 2250 jsvars.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
Tried 8/5 bigram build "again" today and the program still "hangs"
On/off, for the next few weeks, I will be trying again to see if, by some chance,
"updated Bigram firmware" might work on my chip.
Too bad, if there isn't a reference from my purchased Espruino serial number or markings on the STM chip to ascertain if the chips can take the bigram firmware or not. Better yet, a yes/no diagnostic with flash/ram testing in the upper 16K
For now, I can live with 2250 jsvars.