Search results for:

hope is is helpful enough

and badly resets during save, have to flash to solve that

>dump()
digitalWrite(D12,0);
digitalWrite(D13,0);
digitalWrite(D14,0);
=undefined
>save();
=undefined
Erasing Flash...
 ets Jan  8 2013,rst cause:4, boot mode:(3,7)
wdt reset
load 0x40100000, len 1396, room 16
tail 4
chksum 0x09
load 0x3ffe8000, len 776, room 4
tail 4
chksum 0x68
load 0x3ffe8308, len 540, room 4
tail 8
chksum 0x40
csum 0x40
csum err
ets_main.c rll|là|lìb|ìrbbònnlnnâìbpìlrlrlpònàlbnâ|lìlbònnîll`nnlnrnll`pònàrâàbnâ|ìbònnîl`nnlnrnâl`pònàrâàìbnâ|lbònnîl`nnl`nrnl`rnl`rnl|`rònàbânbpürll|là|lìb|ìrbbònnlnnâìbppìlrlrl
Disconnected

those digitalWrites are definitive from old saves,
what about the loader running during power on or hard reset.

still have some commands, any idea?

>reset();
=undefined
1v82.627 Copyright 2015 G.Williams
WARNING: the esp8266 port is in beta, do not expect everything to work
Flash map 4MB:512/512, manuf 0xe0 chip 0x4016
>dump();
digitalWrite(D12,0);
digitalWrite(D13,0);
digitalWrite(D14,0);
=undefined

did, now i get that:

@Kolban Thanks !

so now we have the last part of the MAC: 05:99:c9

wifi.getIP();
={ "ip": 0, "netmask": 0, "gw": 0,
"mac": "5ccf7f 599c9"
}

this is the error list after loading:

it is a ipad air 2 and plays this very well
https://forestmist.org/share/web-audio-a­pi-demo
does the IDE check for plugged connector ?

runs on ipad too, but

SETTINGS -> COMMUNICATIONS : is missing "Connect over Audio"

would be great to have ;-)

SETTINGS -> FLASHER : is dead

ok no problem, can be remove for ipads

Gordon, is there a way to have the editor left and terminal right, for all of us lefties ?
btw, i like the buttons as they are ;-)

thats it - thanks !

running Espruino on ESP8266, like esptool.py does:

esptool.py --port /dev/cu.usbserial --baud 115200 read_mac

Connecting...
MAC: 18:fe:34:05:99:c9

inside esptool.py

// OTP ROM addresses
    ESP_OTP_MAC0    = 0x3ff00050
    ESP_OTP_MAC1    = 0x3ff00054

def read_mac(self):
        mac0 = self.read_reg(self.ESP_OTP_MAC0)
        mac1 = self.read_reg(self.ESP_OTP_MAC1)
        if ((mac1 >> 16) & 0xff) == 0:
            oui = (0x18, 0xfe, 0x34)
        elif ((mac1 >> 16) & 0xff) == 1:
            oui = (0xac, 0xd0, 0x74)
        else:
            raise FatalError("Unknown OUI")
        return oui + ((mac1 >> 8) & 0xff, mac1 & 0xff, (mac0 >> 24) & 0xff)

can someone please explain how to get the wifi mac

The PCA9501 is an 8-bit I/O expander with an on-board 2-kbit EEPROM.
It has six address pins with internal pull-up resistors allowing up to 64 devices

Hi tve,
where do we find the ./wiflash named in the README_flash.txt ?