I've designed a PCB that uses the MDBT42Q module and want to do a small production run of 10 boards. I wanted to support Gordon by buying the MDBT42Q modules directly from the Espruino shop, but it seems that there's only 1 available?
I see I can also buy them from Verical, but how would I flash the Espruino firmware myself? Would I need to use SWD pins on my PCB, or is there a programming jig like with the Puck.js?
Sorry for the delay getting back to you - we'll actually have programmed MDBT42Q modules back in stock by the end of today.
But to flash them yourself, you'd ideally need to use SWD pins on your PCB, yes. I believe Raytac may sell an (expensive) flashing jig, or you could make your own though.
Thanks Gordon! I'll put SWD pins on my PCB, but will be ordering the modules from you in the near future.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© Espruino, powered by microcosm.
Report a problem