I received my puck about 3 days ago and starts playing with it, demos works great, (turn on led, read button, etc..), yesterday I notice that the firmware is version 1.92 so I updated the firmware to 1.94 per website using nfr connect/dfutarg, the update works (red becomes blue, then my phone states disconnecting after graph shows 100%, light becomes red again. I removed the battery wait a few seconds, reinsert battery now the red light stays on, check the website so maybe I touched the button, so removed and reinsert the battery again carefully not pressing or touching near the button, same result the red light stays on. So I downgrade to 1.92 and still the red light stays on. I could't connect to web ide, below is chrome console result. I also tried to hold the button while inserting the battery and I get green light, 3 led on, 5 red blink and when I tried to connect to web ide i get chrome console error (scroll down further on my post).
index.js:75989 Set Slow Write = true
index.js:75989 >>> Connecting to Puck.js 6309
index.js:75989 BT> Device Name: Puck.js 6309
index.js:75989 BT> Device ID: dnK9A/5Kp1BW5f+tpXIrrw==
index.js:75989 BT> ERROR: NetworkError: Connection failed for unknown reason.
index.js:75999 [notify_error] Connection Failed.
console.error @ index.js:75999
error @ index.js:76696
(anonymous) @ index.js:80799
(anonymous) @ index.js:77577
(anonymous) @ index.js:78485
Promise rejected (async)
openSerial @ index.js:78476
openSerialInternal @ index.js:77551
openSerial @ index.js:77519
connectToPort @ index.js:80792
connect @ index.js:80693
selectPortInternal @ index.js:80701
selectPort @ index.js:80705
dispatch @ index.js:4627
elemData.handle @ index.js:4295
index.js:75989 >>> Connection Failed.
If I hold the button while installing the battery, I get green light, flash 3 led light, 5 red blink and error is chromeconsole is below:
Please delete my post above, after problems with my chrome book I switch to my dekstop Linux with bluetooth usb adapter and I can connect again.
No problem! Do you mind if I leave it up? It always helps to have the answer if someone googles for the problem.
If anyone else gets this then it might also help to follow the instructions for I saved some code and my Puck.js no longer works on http://www.espruino.com/Puck.js#troubleshooting
I saved some code and my Puck.js no longer works
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© Espruino, powered by microcosm.
Report a problem